$36.00
8 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you've been wrestling with factory tip-off bases or want a serious upgrade for your rimfire, this EGW scope base turns your Savage 93 into a proper platform for a real optic. It's machined from a single piece of domestic 6061 T6 extruded aluminum and finished in a clean matte black anodize, so it holds up to the field and looks the part. The cross slots run the full length of the rail, which means you get plenty of room to slide your rings fore and aft until your eye relief is dialed in just right.
This particular base is cut for the 1-5/8" ejection port, which covers the Savage 93, newer-production Mark II rifles with the larger port, and the Stevens 310. Older Mark II rifles use a smaller 1-3/8" port and need a different mount, so it's worth measuring your ejection port before ordering to make sure you've got the right one. When in doubt, a quick measurement saves you the hassle of a swap down the road.
The 0 MOA designation means the rail sits flat with no built-in forward slope. For most .22 LR and .22 WMR shooting at normal rimfire distances, flat is exactly what you want since it keeps your scope's elevation adjustment centered and gives you full range in both directions. If you were pushing way out to the edges of a rimfire's capability you might reach for a canted base, but for plinking, small game, and general range work, 0 MOA is the practical choice.
Installation is straightforward. The base ships with the hex-head screws and a wrench to get it on, and EGW recommends torquing to 20 inch-pounds with a drop of blue thread locker to keep everything locked in under recoil. The center channel trims weight down to just a couple ounces, and the beveled sides make it ambidextrous. It accepts any standard Picatinny or Weaver rings, so you can pair it with whatever glass and ring height your setup calls for.
This mount is cut for the 1-5/8" ejection port, which fits the Savage 93, newer-production Mark II rifles, and the Stevens 310. Older Mark II rifles have a smaller 1-3/8" port and require a different EGW base. Measure your ejection port before ordering so you get the right fit the first time.
0 MOA means the rail is flat with no forward slope built in. For typical rimfire shooting with .22 LR or .22 WMR, flat keeps your scope's elevation centered with full adjustment both ways, which is what most shooters want. A canted base only comes into play if you're stretching a rimfire to the far edges of its range.
No, rings are sold separately. The base accepts any standard Picatinny or Weaver-style rings, so you can match the ring height to your scope's objective size and pick the quality level you want. EGW offers their own Picatinny ring options if you'd like to keep everything under one roof.
The base includes the hex-head screws and a wrench to mount it to your receiver. EGW recommends torquing the screws to 20 inch-pounds and adding a drop of blue thread locker so nothing works loose. Blue thread locker is sold separately and is a smart addition for a mount that needs to hold zero.
| UPC | 841370105656 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 41600 |
| Action | |
| Color | Black |
| Length | 8.2500 |
| Model | |
| Style | Picatinny Rail |
You must be logged in to post a review.
Reviews
There are no reviews yet.