$36.00
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you're running a round rear Savage short action and want to dial your scope way out there, this EGW Picatinny rail is the kind of foundation that makes the difference. It's a one-piece base with 20 MOA of built-in elevation, which means the rail angles your scope slightly downward and frees up extra upward turret travel. That's exactly what you want when you're stretching a 6.5 Creedmoor or .308 past 600 yards and don't want to run out of adjustment right when things get interesting.
This base is made specifically for Savage short actions with a ROUND rear receiver and an ejection port, including the AccuTrigger-equipped Model 10, 11, 12, 14, 16, and 110, plus the Stevens 200 short action. It does not fit flat-back Savage receivers, the Savage Axis, or Axis II, so take a quick look at the shape of your rear receiver before ordering. Savage changed up screw sizes over the years, so it's worth pulling and measuring one of your factory screws before install to confirm the right thread.
It's machined from domestic 6061-T6 extruded aluminum, which keeps it light and rigid, and finished in a clean matte black anodize. The full-length Picatinny cross slots give you plenty of room to set your rings for proper eye relief, and it plays nice with any Picatinny or Weaver style ring. A milled channel down the center trims the weight down to right around 2 ounces, so you're adding real mounting capability without any bulk.
Mounting hardware and a wrench come in the box. EGW recommends torquing the screws to about 20 inch pounds and adding a drop of blue thread locker to keep everything locked in under recoil. Zeroing at 200 yards is a solid starting point with a 20 MOA base so you've got the room to climb from there. Designed and built in Pennsylvania, this is a dependable, no-drama platform whether you're chasing groups at the range or reaching out on a hunt.
It fits Savage short actions with a ROUND rear receiver and an ejection port, including the AccuTrigger Model 10, 11, 12, 14, 16, and 110, along with the Stevens 200 short action. It will not fit flat-back Savage receivers, the Savage Axis, or Axis II. Check the shape of your rear receiver before ordering to make sure it's rounded, not flat.
The 20 MOA means the rail is angled slightly, tilting your scope downward so you gain extra upward elevation travel in your turret. This is ideal for long-range shooting out past 600 yards with calibers like 6.5 Creedmoor or .308, where a flat base might leave you bottoming out before reaching your target. For a 20 MOA base like this, zeroing at around 200 yards is a good starting point.
Yes, the rail ships with mounting hardware and a wrench. EGW recommends torquing the screws to about 20 inch pounds and adding a drop of blue thread locker to keep things secure under recoil. Since Savage changed screw sizes over the years, it's smart to pull and measure one of your factory receiver screws beforehand to confirm the correct thread.
This is a true Picatinny-style base, so it accepts any Picatinny or Weaver style scope rings. The full-length cross slots give you flexibility to position your rings for the right eye relief with just about any scope you want to run.
| UPC | 841370105373 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 41002 |
| Action | |
| Color | Black |
| Length | 9.1500 |
| Model | |
| Style | Picatinny Rail |
You must be logged in to post a review.
Reviews
There are no reviews yet.