Description
These are the "S" (Standard) Shell Holder Jaws that Forster installs on the Co-Ax press right from the factory, so if yours have worn, gone missing, or you just want a spare set on the bench, this is the exact replacement part (MPN 001231). What makes the Co-Ax system different from a conventional press is that there are no separate shell holders to keep track of. The jaws do the work, and they float with the die so every case finds its true center for concentric, repeatable results.
What the S Jaws Do on Your Co-Ax
When a case is seated, it's held by spring-loaded jaws that grip the base at the cannelure area for strong, positive extraction. The whole setup is self-acting too, meaning the jaws open and close automatically on the case as you run the handle through its stroke. Raise the handle and they release the case on their own. It's a clean, no-fuss motion that keeps your rhythm going when you're working through a batch.
Caliber Coverage With the S Shell Holder Jaws
One set of S jaws covers around 90% of commercial cartridges, which spans a huge range from 17 Rem and 223 Rem up through 30-06, the belted magnums like 7mm Rem Mag and 300 Win Mag, and plenty of popular handgun rounds. The jaws have a Small end and a Large end, so you flip them to match the case head you're working with. A handful of oddball case heads fall outside their range, including 218 Bee, 22 Hornet, 25 ACP, 7.62x54R, 38-40 WCF, 348 Winchester, 378 Weatherby, 416 Rigby, and 45-70. Those are handled by the optional "LS" (Large/Small) jaws, which are sold separately.
Built in the USA
Like the rest of the Co-Ax line, these jaws are made in the United States and carry Forster's reputation for tight tolerances and long service life. If you already trust your Co-Ax for precision loads, keeping a fresh set of S jaws around is cheap insurance against downtime.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: 001231
- UPC: 757253000157
- Type: "S" (Standard) Shell Holder Jaws
- Fits: Forster Co-Ax Reloading Press
- Caliber Coverage: Approx. 90% of commercial cartridges
- Jaw Ends: Small and Large (flip to match case head)
- Action: Floating, spring-loaded, self-acting
- Country of Origin: Made in USA
What’s Included
- One set of Forster "S" (Standard) Shell Holder Jaws for the Co-Ax Press
Frequently Asked Questions
Are these the same S jaws that come with a new Co-Ax press?
Yes. These are the factory-standard "S" (Standard) Shell Holder Jaws that Forster installs on the Co-Ax press from the factory. They make a perfect replacement if yours are worn or lost, or a handy spare to keep on the bench.
What calibers will the S shell holder jaws handle?
The S jaws cover roughly 90% of commercial cartridges, including popular rounds like 223 Rem, 243 Win, 308, 30-06, 7mm Rem Mag, 300 Win Mag, and many handgun cases. They have a Small end and a Large end that you flip to match the case head. A few case types such as 218 Bee, 22 Hornet, 45-70, and 416 Rigby fall outside their range and require the separate LS jaws.
Do I still need separate shell holders with these jaws?
No, that's the beauty of the Co-Ax system. The floating jaws replace the stack of individual shell holders a conventional press needs. One set handles most of your cartridges, and you just flip the jaws to switch between small and large case heads.
How do the Co-Ax jaws grip and release the case?
The spring-loaded jaws contact the base of the case near the cannelure area for positive extraction. They're self-acting, so they open and close automatically as you run the handle through its stroke, then release the case when you raise the handle. They also float with the die so the case centers precisely for concentric results.




Reviews
There are no reviews yet.