0
0

Rugged Suppressors MD001 M249 Muzzle Device 9/16×24 LH Black

UPC: 859383006587

$120.00

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The M249 is a bit of an oddball when it comes to muzzle threads. That left-hand 9/16×24 pattern rules out most mounts on the market, which is exactly why Rugged built the MD001. This device threads onto your SAW and gives you a proper Dual Taper Locking System interface, so you can run the same Rugged can you use on your other rifles without hunting down some sketchy adapter stack.

Why the MD001 Muzzle Device Earns Its Spot on a Belt-Fed

The Dual Taper Locking System is the heart of this thing. Two mating taper surfaces wedge the suppressor onto the mount, which keeps everything centered and eliminates the wobble and carbon-lock headaches you get with some quick-attach designs. On a belt-fed that heats up fast and rattles hard, that matters. The suppressor goes on with a simple twist, locks up the same way every time, and comes off without a fight even after a long session. Point of impact stays consistent because the mount holds alignment between the bore and the can.

Rugged MD001 Compatibility and Fit

This mount works with Rugged's Dual Taper suppressors, including the Surge762, Razor762, and Micro30. Those cans carry belt-fed ratings from Rugged, so pairing one with the MD001 on an M249 is exactly the kind of use they were designed for. The device wears a durable black finish that blends in with the rest of the gun and shrugs off heat and carbon. Overall length runs about 4.6 inches, and the thread pattern is 9/16×24 left-hand, matching the factory M249 muzzle.

If you have been wanting to suppress a SAW, this is the piece that makes it happen. Thread it on, torque it down, and your Rugged can snaps on and off as fast as it does on any of your other hosts. Simple, repeatable, and built to take the abuse a belt-fed dishes out.

Key Specifications

  • Manufacturer: Rugged Suppressors
  • Manufacturer Part Number: MD001
  • UPC: 859383006587
  • Model: M249
  • Thread Pattern: 9/16×24 LH
  • Mounting System: Dual Taper Locking System
  • Suppressor Compatibility: Rugged Surge762, Razor762, Micro30
  • Finish: Black
  • Length: 4.6 in
  • Intended Host: M249 (belt-fed)

What’s Included

  • Rugged Suppressors MD001 M249 muzzle device

Frequently Asked Questions

Which suppressors work with the Rugged MD001 M249 muzzle device?

The MD001 uses Rugged's Dual Taper Locking System, so it pairs with Rugged cans that run that mounting interface, including the Surge762, Razor762, and Micro30. Those models also carry belt-fed ratings from Rugged, which makes them a natural match for an M249 host. It is not compatible with suppressors from other brands that use different quick-attach systems.

Will the MD001 fit my M249's factory threads?

Yes, that is the whole point of this mount. The M249 uses a left-hand 9/16×24 thread pattern at the muzzle, which is unusual, and the MD001 is cut specifically for it. Just make sure your barrel actually has that thread pattern before ordering, since it will not fit standard right-hand rifle threads.

How does the Dual Taper Locking System hold up under full-auto fire?

It holds up well, which is why Rugged rates its Dual Taper cans for belt-fed use. The tapered mating surfaces wedge the suppressor onto the mount, keeping it centered and tight so heat and vibration do not walk it loose. It also resists carbon lock better than many quick-detach designs, so the can comes off cleanly even after high round counts.

Does the MD001 do anything on its own without a suppressor attached?

Its primary job is serving as the mounting interface for a Rugged suppressor, and that is where it earns its keep. You can leave it installed full time and just attach the can when you want to run suppressed. The black finish and compact 4.6 inch length keep it low-profile on the gun when the suppressor is off.

Additional information

UPC

859383006587

Manufacturer

Manufacturer Part Number

MD001

Length

4.6000

Model

Thread Pattern

9/16×24 LH

Reviews

There are no reviews yet.

Be the first to review “Rugged Suppressors MD001 M249 Muzzle Device 9/16×24 LH Black”