$97.00
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
A good muzzle brake should earn its spot on your barrel, and this one pulls double duty. On its own, the Rugged Suppressors 3 Port Brake vents gas through three ports to knock down felt recoil and keep the muzzle settled, which makes a real difference when you are running fast follow-up shots or just want a softer shooting rifle. But the real reason most folks pick this brake up is what it does when a can enters the picture.
This brake serves as the mounting platform for Rugged's Dual Taper Locking System, which means it pairs with the Radiant762, Surge 7.62, Razor 7.62, and Micro30 suppressors. Thread the brake onto your barrel once, and your Rugged can spins on and locks up tight in seconds. The dual taper design keeps everything centered and repeatable, so you are not chasing your zero every time you swap the suppressor between rifles. Pick up a brake for each host and one can covers your whole safe.
The 1/2×28 thread pattern fits the most common muzzle threading out there, and the .30 caliber aperture means this same brake works on 5.56, .22 caliber wildcats, and 300 Blackout hosts alike. It is machined from steel with a black finish that holds up to heat and hard use, and at just over two inches long it will not turn your rifle into a flagpole. Rugged includes timing shims in the package, so you can index the ports correctly without hunting down a shim kit or crush washer separately.
If you already own a Rugged rifle can or have one on the way, extra mounts like this are the easiest way to stretch that investment across multiple rifles. And even on days when the suppressor stays home, you have still got a legitimate three port brake doing honest work at the muzzle. Simple, well made, and useful either way you run it.
This brake is the mount for Rugged's Dual Taper Locking System, so it works with the Radiant762, Surge 7.62, Razor 7.62, and Micro30. The suppressor spins onto the brake and the tapered surfaces lock it up centered and secure. It is a quick, repeatable attachment that makes moving one can between several rifles painless.
Yes, and that is by design. The .30 caliber bore opening gives smaller calibers like 5.56 and .22 centerfires plenty of clearance while still letting the same brake serve 300 Blackout hosts. You give up a hair of braking efficiency compared to a caliber-matched aperture, but you gain the flexibility of one mount pattern across multiple guns.
Rugged includes timing shims in the box, so you can index the brake with the ports oriented properly without a crush washer. Stack shims as needed until the brake torques down in the right position. Taking the time to shim it correctly matters more than usual here, since the brake also has to sit square for the suppressor to align properly.
Definitely. The three port design vents gas to the sides to cut felt recoil and keep the muzzle flatter during rapid strings. Plenty of people run these brakes full time and simply thread the can on when they want to shoot quiet, which is exactly how Rugged intended it.
| UPC | 859383006570 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | MB011 |
| Length | 1.5 |
| Model | |
| Package Height | 3.0 |
| Package Width | 2.0 |
| Product Type | Accessory-Muzzle Brakes |
| Shipping Weight | 0.235 |
| Thread Pattern | 1/2"-28 tpi |
You must be logged in to post a review.
Reviews
There are no reviews yet.