Description
Direct-thread mounting works fine until you want to move one suppressor between a few different hosts, and then it gets old fast. The Rugged Suppressors Obsidian9 3-Lug Adapter fixes that by threading onto your 5/8"-24 muzzle and giving you a true HK-spec 3-lug interface. Pair it with Rugged's 3 Lug Mount in your Obsidian9 or Obsidian45 and you can snap the can on and off in seconds, no wrench, no re-timing, no fuss.
Why the Obsidian9 3-Lug Adapter Earns Its Spot
The standout feature here is Rugged's patented Go/No Go Gauge built into the adapter. It gives you a clear visual confirmation that the suppressor is fully seated and properly engaged before you send a round downrange. That little bit of peace of mind matters a lot when you're swapping a can between hosts all day at the range. The 3-lug system also eliminates the suppressor walk-off you can get with direct-thread setups on fixed-barrel guns, since the lugs lock up instead of relying on thread tension alone.
Built to 9mm HK Spec
This adapter is machined to genuine 9mm HK 3-lug specification, so it plays nice with the wide world of 3-lug mounts and accessories built around that standard. Keep in mind it is a 9mm-spec part, so it is not compatible with .45 ACP. The 5/8"-24 thread pitch covers 9mm barrels cut in that pattern, and Rugged offers the same adapter in other pitches if your barrel is threaded differently. Fit, finish, and machining are what you'd expect from Rugged, which is to say clean and precise with a durable black finish that matches the rest of their lineup.
Quick-Attach Convenience for Your Obsidian
If you run an Obsidian9 across a pistol and a PCC, or you just want faster transitions than threading a can on and off, this adapter is the simple upgrade that makes the whole system click. Thread it on, torque it down, and enjoy the convenience.
Key Specifications
- Manufacturer: Rugged Suppressors
- Manufacturer Part Number: OA006
- UPC: 859383006730
- Model: Obsidian9 3-Lug Adapter
- Caliber: 9mm
- Thread Pattern: 5/8"-24 tpi
- Lug Specification: 9mm HK 3-lug spec
- Material: Stainless Steel
- Color/Finish: Black
- Length: 2.55 in
- Weight: 0.129 lb
- Compatibility: Rugged Obsidian9/Obsidian45 with 3 Lug Mount; not compatible with .45 ACP
What’s Included
- Rugged Suppressors Obsidian9 3-Lug Adapter, 5/8"-24
Frequently Asked Questions
Will the Obsidian9 3-Lug Adapter work with my .45 ACP suppressor setup?
No. This adapter is machined to 9mm HK 3-lug specification and is not compatible with .45 ACP. If you're running .45, you'll want the correct .45-spec 3-lug hardware instead. It does pair with the Obsidian45 suppressor body when that can is set up with the 9mm 3 Lug Mount and used on a 9mm host.
Do I need anything else to use this adapter with my Obsidian9?
Yes, you'll need the Rugged 3 Lug Mount, which replaces the piston assembly inside the Obsidian9 or Obsidian45. The adapter threads onto your barrel and the mount lives in the suppressor, and the two lock together for quick attach and detach. The adapter alone won't connect the can to your gun.
What is the Go/No Go Gauge on the Rugged 3-Lug Adapter?
It's a patented visual reference built into the adapter that confirms your suppressor is fully seated and properly engaged on the lugs. A quick glance tells you the can is locked on before you fire. It's a simple feature that removes a lot of second-guessing when you're swapping the suppressor between hosts.
My 9mm barrel is threaded 1/2×28, will this version fit?
This particular adapter is cut for 5/8"-24 threads, so it won't fit a 1/2×28 barrel. The good news is Rugged makes the same Obsidian9 3-lug adapter in 1/2×28, 1/2×36, and 13.5×1 LH as well. Just double-check your barrel's thread pitch and grab the matching version.






Reviews
There are no reviews yet.