Description
The EGW Ruger PC Carbine sight mount solves a problem a lot of PC Carbine owners run into when they want a low, clean red dot setup without stacking a bunch of rail adapters. This is a direct replacement plate that slides into the factory rear sight dovetail, giving you a solid, repeatable platform for Vortex Viper, Vortex Venom (open emitter), Burris FastFire, Docter, and Crimson Trace CTS-1200 and CTS-1300 optics. It's machined from 7075 aluminum and finished in a matte black hardcoat, measuring 1.811 inches long and .99 inches wide, so it keeps the optic sitting nice and low over the bore.
How the Ruger PC Carbine Mount Installs
Installation is about as straightforward as it gets. You pull the factory rear sight out of the dovetail, slide the EGW mount in from left to right with the muzzle facing forward, and tighten things down. The dovetail has a progressive taper built in to make that fit easier to seat. No drilling, no tapping, no alterations to the firearm. If you ever want to go back to irons, you just pull the mount and drop your rear sight back in.
What Red Dots Fit This EGW PC Carbine Plate
This mount is cut for the Docter/Noblex optic footprint, which covers a big chunk of the popular micro red dots out there. Vortex Viper and Venom are the headliners, but Burris FastFire, Docter, and the Crimson Trace CTS-1200 and CTS-1300 all drop right on. EGW includes button head cap screws for the Viper and Venom and flat head cap screws for the FastFire and Docter optics, so you've got the right hardware for whichever way you go. The screws use a 5/64 inch allen wrench, and EGW recommends a dab of blue Loctite and torquing to 15 in/lbs.
One thing worth knowing before you order: this mount works with Ruger PC Carbines that do not have the AR-style handguard. If yours has the standard setup, you're good to go. The same plate also fits a range of Henry and Marlin lever guns, which makes it a handy piece to keep around if you run more than one rifle.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 49331
- UPC: 841370116645
- Model: PC Carbine
- Fits: Ruger PC Carbine (non AR-style handguard models)
- Optic Footprint: Docter/Noblex
- Compatible Optics: Vortex Viper, Vortex Venom, Burris FastFire, Docter, Crimson Trace CTS-1200/CTS-1300
- Material: 7075 Aluminum
- Finish: Matte Black Hardcoat Anodized
- Overall Length: 1.811 inches
- Overall Width: .99 inches
- Mount Style: Rear sight dovetail replacement
- Torque Spec: 15 in/lbs
- Tool Required: 5/64 inch allen wrench
- Color: Black
- Country of Origin: Made in the USA
What’s Included
- EGW Ruger PC Carbine sight mount plate
- 2 Button head cap screws (for Vortex Viper and Venom)
- 2 Flat head cap screws (for Burris FastFire and Docter)
- 1 Set screw
- Installation instructions
Frequently Asked Questions
Will this EGW mount fit any Ruger PC Carbine?
It fits Ruger PC Carbine models that do not have the AR-style handguard. If your carbine has the standard configuration, this mount is the right one. Double check your rifle's setup before ordering if you're unsure.
Which red dot sights work with this PC Carbine sight mount?
It's cut for the Docter/Noblex footprint, which covers the Vortex Viper and Vortex Venom (open emitter), Burris FastFire, Docter, and the Crimson Trace CTS-1200 and CTS-1300. EGW includes button head screws for the Viper and Venom and flat head screws for the FastFire and Docter optics. That gives you some flexibility to pick whichever micro red dot you prefer.
Do I need a gunsmith or any drilling to install it?
No. You remove the factory rear sight and slide the EGW mount into the dovetail from left to right, then tighten it down. No drilling, tapping, or permanent alterations are required, and you can swap your rear sight back in anytime.
What tools do I need to mount my optic?
The included screws use a 5/64 inch allen wrench. EGW recommends applying blue Loctite to the mounting screws and torquing them to 15 in/lbs for a secure hold. A small piece of paper between the optic and the mount during install makes future removal easier and keeps Loctite off your red dot.




Reviews
There are no reviews yet.