Description
This EGW rail is built for folks running a newer flat-top Ruger M-77 Long Action (or a Hawkeye Long Action that isn't factory drilled and tapped) who want a true 1913 Picatinny platform instead of Ruger's proprietary integral base setup. It's a one-piece rail machined from domestic 6061 T6 extruded aluminum with a matte black anodized finish, and it carries a built-in 20 MOA cant that angles your optic downward to free up more of your scope's internal elevation. That extra travel is what makes reaching out past 500 yards a whole lot easier without maxing out your turret.
One thing to be clear about up front: this is a drill and tap mount. It is sold drilled for 8-40 screws and does not clamp onto the factory integral bases, so the receiver has to be drilled and tapped to install it. If you're comfortable with that work or you have a gunsmith handling it, this is the clean way to convert that proprietary Ruger mounting system over to a standard rail that accepts any Picatinny or Weaver rings you like.
Why the EGW M-77 20 MOA Rail Earns Its Keep
The full-length Picatinny cross-slots give you real freedom to slide rings fore and aft and dial in your eye relief, which matters when you're pairing a big long-range scope with a bolt gun. The milled center channel trims weight without giving up rigidity, and the whole rail runs 6.670 inches long with a 4.215 inch center spread between the two middle receiver holes.
Getting the EGW Ruger M-77 Rail Mounted Right
EGW includes the 8-40 hex head screws and a wrench in the package, so you've got the hardware to get going. A good practice is roughly 20 in-lbs of torque with a drop of blue thread locker to keep everything locked in under recoil. Confirm your receiver profile before ordering, since this fits the flat-top style and not the older rounded tang-safety receivers or factory drilled and tapped Hawkeye Hunter and Long Range models.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 46122
- UPC: 841370106493
- Fits: Ruger M-77 Long Action (Flat Top) and Hawkeye Long Action not factory drilled & tapped
- Action Length: Long Action
- Cant / MOA: 20 MOA
- Rail Type: One-Piece Picatinny (MIL-STD-1913)
- Material: 6061 T6 Extruded Aluminum
- Finish: Matte Black Anodized
- Overall Length: 6.670 in
- Center Spread: 4.215 in
- Base Height: Approx. 0.4 in
- Mounting Screws: 8-40 Hex Head
- Receiver Prep: Requires Drilling & Tapping (8-40)
- Ring Compatibility: Picatinny or Weaver
- Made In: USA
What’s Included
- One-piece EGW 20 MOA Picatinny rail
- 8-40 hex head mounting screws
- Hex wrench
Frequently Asked Questions
Does this EGW Ruger M-77 rail require drilling and tapping?
Yes. This rail does not clamp onto the Ruger's factory integral bases, so the receiver must be drilled and tapped to install it. It comes drilled for 8-40 screws, and if you're not set up for that work, a gunsmith can handle the install.
Which Ruger models does the 20 MOA rail fit?
It's designed for the newer flat-top Ruger M-77 Long Action and Hawkeye Long Action rifles that aren't already factory drilled and tapped. It does not fit the older rounded tang-safety M-77 receivers or factory drilled and tapped Hawkeye Hunter and Long Range models, so check your receiver profile before ordering.
What does the 20 MOA cant do for me?
The 20 MOA built-in downward cant tilts your optic so you preserve more of the scope's internal elevation for longer shots. It's the go-to choice when you're stretching things out past 500 yards. If most of your shooting stays closer in, EGW also offers a 0 MOA version of this rail.
What rings will work with this Picatinny rail?
The rail is built to MIL-STD-1913 Picatinny spec, so it accepts any standard Picatinny or Weaver style rings. The full-length cross-slots let you position the rings fore and aft to fine-tune your eye relief with just about any scope you want to run.





Reviews
There are no reviews yet.