0
0

EGW Ruger 10/22 Takedown 0 MOA Picatinny Rail Scope Mount – Black

UPC: 841370106448

$27.00

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've got a Ruger 10/22 Takedown and you're tired of fighting with factory tip-off bases or wishing you had more real estate for your optic, this EGW rail is the fix. It's a one-piece Picatinny base machined specifically for the 10/22 and 10/22 Takedown receiver, so you get a true drop-on fit without guesswork. The full-length cross slots give you plenty of room to slide your rings exactly where your eye relief wants them, whether that's a compact red dot or a full-size rimfire scope.

What Makes the EGW 10/22 Takedown Rail Worth Running

EGW cuts these in-house from domestic 6061-T6 extruded aluminum, then tumbles, sandblasts, and Type II anodizes them for a finish that holds up to real range time. The center channel trims the weight down to right around 2 ounces, so you're not adding bulk to a rifle that's built to break down and travel. At 0 MOA, this is the base you want for everything inside about 150 yards, which covers just about all the plinking, small game, and range work a 10/22 sees.

Fit and Finish on the Ruger Takedown Mount

The rail sits low and is lowered in the center so, on models with the flip-up rear sight, you can still get a look at your factory irons with the mount installed. Center spread runs 2.57 inches and overall length is 4.645 inches, so it's worth measuring your receiver hole spacing to confirm the match before you wrench it down. Owners consistently praise the tight fit and quality, with folks noting it attaches cleanly and holds a solid zero out of the box.

Getting the EGW Rail Mounted Right

Installation is about as simple as it gets. EGW includes the #6-48 screws and a T-10 bit in the box, and they recommend torquing to 20 inch-pounds with a drop of blue threadlocker to keep everything put through recoil and takedown cycles. From the screws to the bit to the packaging, the whole thing is made in the USA.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • MPN: 46101
  • UPC: 841370106448
  • Model: 10/22 Takedown
  • Fits: Ruger 10/22 and Ruger 10/22 Takedown
  • Rail Type: One-Piece Picatinny (MIL-STD 1913)
  • Minute of Angle: 0 MOA
  • Material: Domestic 6061-T6 Extruded Aluminum
  • Finish: Matte Black Type II Anodized
  • Overall Length: 4.645 in
  • Center Spread: 2.57 in
  • Height: Approx. 0.4 in (top of receiver to top of rail)
  • Weight: 2 oz
  • Ambidextrous: Yes
  • Torque Spec: 20 in/lbs
  • Made In: USA

What’s Included

  • EGW 0 MOA Picatinny rail scope mount
  • #6-48 x 1/4 mounting screws
  • T-10 bit

Frequently Asked Questions

Does this EGW rail fit both the standard 10/22 and the 10/22 Takedown?

Yes, this base is machined to fit both the Ruger 10/22 and the 10/22 Takedown receiver. EGW builds it specific to the gun for a clean drop-on fit. It's a good idea to measure your receiver hole spacing against the 2.57-inch center spread to confirm before installing.

Can I still use my factory iron sights with the mount installed?

On 10/22 models with the flip-up rear sight, the lowered center channel is designed so you can still see your factory irons with the rail in place. On models with the taller adjustable rear sight, the view may be obstructed. For most Takedown setups running a flip-up sight, you'll keep that backup option.

Why would I choose the 0 MOA version over a 20 MOA rail?

The 0 MOA base is the right call for most 10/22 shooting inside roughly 150 yards, which covers plinking, small game, and typical range distances. A 20 MOA rail adds built-in elevation for pushing out toward 300 yards with a .22. Since the 10/22 is most at home at shorter ranges, the 0 MOA rail keeps your scope centered in its adjustment range.

What's the best way to install this rail?

EGW includes the #6-48 screws and a T-10 bit so you have everything you need in the box. They recommend torquing the screws to 20 inch-pounds and adding a drop of blue threadlocker to keep things from backing out. Take your time, snug it down evenly, and you'll have a base that holds zero through plenty of takedown cycles.

Additional information

UPC

841370106448

Manufacturer

Manufacturer Part Number

46101

Color

Black

Length

9.0500

Model

Style

Picatinny Rail

Reviews

There are no reviews yet.

Be the first to review “EGW Ruger 10/22 Takedown 0 MOA Picatinny Rail Scope Mount – Black”