$73.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Ruger builds its own proprietary dovetail right into the receiver of the #1, 77/22, Mini 14/30, and the Redhawk, which means you skip the separate base and mount your optic directly to the gun. Warne's 1RM Maxima rings are machined specifically for that dovetail, so they drop into place and lock down with no guesswork. You get a matched pair in medium height for a 1-inch scope tube, finished in a low-glare matte black that blends in nicely on a hunting setup.
These are solid steel, vertically split rings, which is a bit different from the usual horizontal-split design. That vertical split gives you a wide, even clamping surface around the scope tube so your optic sits firm without getting marked up. Warne machines them to tight tolerances to match Ruger's dovetail exactly, and they're made right here in the USA. The steel construction is what lets them stand up to serious recoil and heavier glass without shifting on you.
The rings use a Ruger-specific scalloped recoil control key that engages the receiver dovetail for a positive, no-slip hold. Each ring clamps around your scope with four T-15 Torx socket cap screws, and the design permanently attaches to the dovetail for a rock-solid mount. A smart way to install is to run the bottom screws first and leave the top screws loose so you can set eye relief and level the reticle, then torque everything down. Keep the screws at 25 in/lb max on dry threads and you're set.
Medium height works well with standard hunting scopes, giving most objectives up to around 42mm the clearance they need over the barrel. If you're running larger glass, it's worth checking that the objective bell clears before you commit. For folks mounting a classic deer scope on a #1 or topping off a Redhawk for handgun hunting, this medium pair hits the sweet spot.
These rings are machined for Ruger's proprietary receiver dovetail found on the #1, 77/22, Mini 14/30, and the Blackhawk and Redhawk revolvers. Because the dovetail is built into the gun, you mount the rings directly with no separate base. They're made to match that specific dovetail, so they won't fit the tapered M77/Hawkeye receiver, which uses a different Warne ring.
Yes, the 1RM is sold as a matched pair with the recoil keys and screws you need to mount a 1-inch scope. You won't need to buy a second set or a separate base for your Ruger.
Set your scope in the ring halves, start all four T-15 Torx screws, and snug the bottom screws first while leaving the tops loose so you can adjust eye relief and level the reticle. Once everything is dialed in, torque the screws to a maximum of 25 in/lb on dry threads. Taking it in that order gives you a firm, even clamp without peening the tube.
Medium height is a solid match for most standard hunting scopes and handles objectives up to about 42mm. If you plan to run a larger objective bell, measure for clearance over the barrel before mounting. For typical deer scopes on a #1 or a revolver optic on a Redhawk, medium is usually the right call.
| UPC | 656813010493 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 1RM |
| Length | 6.4000 |
| Product Type | RUGER STYLE |
| Style | Ruger-Style Rings |
You must be logged in to post a review.
Reviews
There are no reviews yet.