Description
The RPM Precision 35mm Low scope rings from Ruff's Precision Manufacturing solve a problem most people don't think about until they're already missing hits at distance: rifle cant. These rings place the center of a 35mm scope tube .885" above the base, and the big draw here is the co-linear bubble level built right into the bottom half of the rear ring. Because it sits in the lower ring, the level reads co-linear to your platform once everything is mounted, giving you a true read on whether the gun is level under the optic.
What the Co-Linear Level on These RPM Rings Buys You
The level is positioned so you can glance at it with your non-dominant eye while you're still behind the glass. That means a quick cant check right before the shot without breaking your position or cheek weld. Cant has an outsized effect the farther you reach out, so having a real-time reference baked into the rings instead of clamping on a separate add-on keeps your setup clean and your dope honest.
Build and Materials on the Ruff's Precision 35mm Low Rings
The ring body and cap are machined from 6061-T6 aluminum, and the set uses a 303 stainless steel cross bolt and nut to lock down to a Picatinny rail. An alignment lug keeps the cap squared to the base while you run the cap screws, which takes the guesswork out of getting even ring gaps. These are proudly made in the USA and come in at roughly 3.9 ounces for the low height, so you're adding a stable mount without much weight.
Getting the Most From This RPM Ring Set
Mounting is straightforward: level the rifle, level the scope, then torque the caps down. Ruff's calls for 18 in/lbs on the cap screws and 45 in/lbs on the cross bolt, so a good torque wrench earns its keep here. At the low .885" height, this set is well suited to precision bolt guns and anything where a lower, consistent scope height helps you lock in a repeatable cheek weld.
Key Specifications
- Tube Diameter: 35mm
- Ring Height: Low (.885")
- Quantity: Matched pair (set of 2)
- Ring Body & Cap Material: 6061-T6 Aluminum
- Hardware: 303 Stainless Steel Cross Bolt & Nut (1/2")
- Base Compatibility: Picatinny
- Integrated Feature: Co-Linear Bubble Level
- Cap Screw Torque: 18 in/lbs
- Cross Bolt Torque: 45 in/lbs
- Weight: Approx. 3.9 oz
- Country of Origin: Made in USA
- Manufacturer: Ruff's Precision Manufacturing (RPM Mounts)
- Manufacturer Part Number: CLR-35885
- UPC: 850063702065
What’s Included
- Matched pair of RPM Precision 35mm Low scope rings (2 rings with caps)
- 303 stainless steel cross bolt and nut hardware
- Installation guide
Frequently Asked Questions
What does the co-linear bubble level on the RPM 35mm rings actually do?
The level is set into the bottom half of the rear ring, so once the rings are mounted it reads co-linear to your platform. It gives you a real-time cant reference you can check with your non-dominant eye while still behind the scope, both during mounting and right before a shot. It also saves you from clamping on a separate anti-cant device.
Will these Ruff's Precision rings fit my rail?
These rings are built to clamp onto a Picatinny rail using the 303 stainless cross bolt and nut. As long as your rifle or base has a standard Picatinny rail, you're set. Just confirm your scope has a 35mm main tube to match the ring diameter.
What ring height are these and who is the low .885" good for?
This set is the low height, placing the center of the scope tube .885" above the base. A lower height helps you keep a solid, repeatable cheek weld, which is why it's a popular pick for precision bolt guns. If your objective bell or a large turret housing clears at that height, the low rings are a great choice.
What torque should I use when mounting the RPM 35mm rings?
Ruff's recommends 18 in/lbs on the cap screws and 45 in/lbs on the cross bolt. Using a quality torque wrench helps you hit those numbers and avoid over-tightening on the scope tube. The built-in alignment lug also keeps the cap squared to the base so your ring gaps stay even as you torque down.





Reviews
There are no reviews yet.