0
0

Ruff’s Precision RPM CLR-34885 34mm Low (0.885″) Scope Rings

UPC: 850063702034

$174.99

8 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Ruff's Precision RPM CLR-34885 takes one of the most tedious parts of mounting an optic and builds the fix right into the rings. These 34mm rings sit at a low 0.885" height and feature an integrated co-linear bubble level positioned so you can check your cant from the shooting position with your non-dominant eye. No more stacking tiny levels on the rail and the turret cap and hoping everything lines up. Level the gun, level the scope, and you are ready to go.

What Sets the RPM CLR-34885 Apart

The standout here is where that bubble lives. The level is machined into the bottom half of the ring, which means it stays in your sight picture while you are behind the glass. That makes it genuinely useful in the field, not just on the bench during setup. Folks running these have mounted everything from Vortex Viper HD glass to Nightforce ATACR scopes and reported they lock down solid and hold zero shot after shot.

Build Quality on the Ruff's Precision Rings

The ring body and cap are machined from 6061-T6 aluminum, paired with a 303 stainless steel cross bolt and nut. There is an alignment lug that keeps the cap and base lined up correctly while you run down the cap screws, so you get even, repeatable clamping every time. The edges are machined smooth and catch-free, and the whole set is made in the USA. These are built to a tight tolerance, and the fit and finish reflect that.

Getting the CLR-34885 Mounted

Installation is straightforward. A T25 Torx bit comes in the box so you can get started right away. Ruff's recommends 18 in-lbs on the cap screws and 45 in-lbs on the cross bolt, so grab a torque wrench and you will have a clean, level mount in minutes. At the low 0.885" height, this set works well for low-profile builds where you want the scope tucked in close to the bore for a natural cheek weld.

Key Specifications

  • Manufacturer: Ruff's Precision Manufacturing (RPM)
  • Manufacturer Part Number: CLR-34885
  • UPC: 850063702034
  • Tube Diameter: 34mm
  • Ring Height: Low (0.885")
  • Ring Quantity: Pair (Set of 2)
  • Ring Body & Cap Material: 6061-T6 Aluminum
  • Cross Bolt & Nut: 303 Stainless Steel (1/2")
  • Integrated Level: Co-Linear Bubble Level
  • Alignment Feature: Integrated alignment lug for cap/base positioning
  • Cap Screw Torque: 18 in-lbs
  • Cross Bolt Torque: 45 in-lbs
  • Weight: 3.9 oz
  • Color: Black
  • Country of Origin: Made in the USA

What’s Included

  • Pair of 34mm low (0.885") scope rings with co-linear bubble level
  • T25 Torx bit

Frequently Asked Questions

Where is the bubble level on the CLR-34885 and can I see it while shooting?

The co-linear bubble level is machined into the bottom half of the ring so it stays in your field of view from the shooting position. You can check your cant with your non-dominant eye without lifting your head off the stock. Keep in mind that a tall throw lever on your turret could partially block the view at max magnification depending on your setup.

What size scope and mounting height do these rings fit?

These rings are built for 34mm scope tubes and sit at a low 0.885" height. The low profile keeps your optic tucked close to the bore, which works well for a natural cheek weld on low-mount builds. If you are running a large objective lens, double-check clearance over the barrel before committing to the low height.

Does the RPM CLR-34885 come with the tool needed to install it?

Yes, a T25 Torx bit is included in the box so you can mount up right away. Ruff's recommends torquing the cap screws to 18 in-lbs and the cross bolt to 45 in-lbs. A quality torque wrench is the best way to hit those numbers and keep your clamping even.

What are these scope rings made from?

The ring body and cap are machined from 6061-T6 aluminum, with a 303 stainless steel cross bolt and nut. An integrated alignment lug keeps the cap and base lined up as you tighten the cap screws for consistent, repeatable clamping. The whole set is made in the USA.

Additional information

UPC

850063702034

Manufacturer

Manufacturer Part Number

CLR-34885

Shipping Weight

0.431

Reviews

There are no reviews yet.

Be the first to review “Ruff’s Precision RPM CLR-34885 34mm Low (0.885″) Scope Rings”