Description
The Ruff's Precision Delta 30mm Cantilever Mount is a one-piece optic mount built for 30mm tube scopes, with a 1.50" height measured to the center of the ring. That cantilever design pushes the rings forward of the receiver, which is exactly what you need to dial in proper eye relief on an AR-platform rifle or any flat-top build where the optic needs to sit out over the handguard. It's the no-bubble version of the Delta, so there's no co-linear level built in here, just a clean, focused mount.
Ruff's Precision Manufacturing (RPM) built the Delta line with a specific goal in mind. The company says the series was developed to cut weight, improve accuracy, and look good doing it, and the numbers back that up. The 30mm variant comes in right around 5.5 to 5.7 ounces, so you're getting a stable platform without hanging a bunch of extra weight off the front of your rifle.
What Sets the Delta Cantilever Mount Apart
The body and cap are machined from 6061-T6 aluminum, with a 303 stainless steel cross bolt and nut running a 1/2" fastener. There's an integrated recoil lug that locks into your Picatinny rail to keep everything from walking under recoil, plus an alignment lug that keeps the cap and base lined up correctly when you're torquing down the cap screws. That little feature takes a lot of the guesswork out of getting your rings seated square.
Dialing In Your Delta 30mm Mount
Installation is straightforward if you follow the recommended torque values. RPM calls for 18 in/lbs on the cap screws and 45 in/lbs on the cross bolt, so a good torque wrench is your friend here. Stick to those numbers and you'll get consistent, repeatable clamping without over-crushing your scope tube. The whole thing is proudly made in the USA, which is a nice bonus for folks who like to keep their gear homegrown.
Key Specifications
- Manufacturer: Ruff's Precision Manufacturing (RPM)
- Manufacturer Part Number: DC-30150
- UPC: 850063702119
- Tube Diameter: 30mm
- Ring Height: 1.50" to center of optic
- Mount Type: One-piece cantilever
- Weight: Approx. 5.5 to 5.7 oz
- Ring Body & Cap Material: 6061-T6 aluminum
- Cross Bolt & Nut: 303 stainless steel, 1/2"
- Recoil Lug: Integrated
- Bubble Level: Not included (no-bubble version)
- Cap Screw Torque: 18 in/lbs
- Cross Bolt Torque: 45 in/lbs
- Color: Black
- Country of Origin: USA
What’s Included
- Ruff's Precision Delta 30mm Cantilever Mount (DC-30150)
- Cap screws
- Cross bolt and nut
Frequently Asked Questions
What size scope tube does the Delta 30mm Cantilever Mount fit?
This mount is built specifically for scopes with a 30mm main tube. If your optic has a 34mm or 35mm tube, RPM offers separate Delta models (DC-34150 and DC-35150) sized for those.
What is the ring height on this cantilever mount?
The ring height is 1.50" measured to the center of the ring and optic. That's a common height for AR-platform rifles and flat-top builds where you want the scope sitting high enough to clear the handguard and get a comfortable cheek weld.
Does the Delta 30mm Cantilever Mount come with a bubble level?
No, this is the no-bubble version of the Delta, so it does not include a co-linear bubble level. If a built-in level matters to you, RPM makes other mounts in their lineup that come with the co-linear level feature.
What are the recommended torque specs for installation?
RPM recommends 18 in/lbs on the cap screws and 45 in/lbs on the cross bolt. Using a quality torque wrench and sticking to those values gives you a secure, repeatable hold without risking damage to your scope tube.



Reviews
There are no reviews yet.