Description
Ruff's Precision Manufacturing built the Delta series with a simple goal: cut weight, improve accuracy, and look sharp doing it. This DC-35150 is the 35mm version, sized for the growing crowd of large-tube optics and LPVOs that need more than a standard 30mm or 34mm ring. The cantilever design carries the rings forward of the clamping point, which is exactly what you want on a flat-top rifle where receiver rail space runs short. That forward offset gives you the eye relief and natural head position that traditional rings often can't deliver on shorter-stocked platforms.
What Sets the Delta DC-35150 Apart
The body and cap are machined from 6061-T6 aluminum, and the cross bolt and nut are 303 stainless steel with a 1/2" head. There's an integrated recoil lug that ties the mount into your rail and keeps it from walking under repeated recoil, plus an alignment lug that keeps the cap and base squared up while you're torquing down the cap screws. The whole unit is proudly made in the USA and comes in at a trim 5.8 ounces, which is light for a one-piece 35mm mount.
Dialing In the 35mm Cantilever Mount
The 1.50" height is measured to the center of the optic, a spec that plays nicely with cheek weld and lower-third co-witness setups on modern sporting rifles. When you install it, RPM calls for 18 in/lbs on the cap screws and 45 in/lbs on the cross bolt. Stick to those numbers with a good torque wrench and you'll get consistent clamping without over-crushing the tube. A one-piece mount like this also takes the guesswork out of ring alignment, so you're not fighting two separate rings and risking a pinched scope tube.
If you're running a 35mm LPVO or precision scope on an AR-pattern rifle or another flat-top build, this is a clean, rigid, weight-conscious way to get it mounted right.
Key Specifications
- Manufacturer: Ruff's Precision Manufacturing (RPM)
- Model: Delta Series Cantilever
- Manufacturer Part Number: DC-35150
- UPC: 850063702140
- Ring Diameter: 35mm
- Mount Height: 1.50" to center of optic
- Weight: 5.8 oz
- Ring/Cap Material: 6061-T6 Aluminum
- Cross Bolt & Nut: 303 Stainless Steel, 1/2"
- Recoil Lug: Integrated
- Cap Screw Torque: 18 in/lbs
- Cross Bolt Torque: 45 in/lbs
- Rail Fit: Picatinny / flat-top
- Country of Origin: USA
What’s Included
- RPM Delta DC-35150 35mm cantilever scope mount
- Cap screws
- 303 stainless steel cross bolt and nut
Frequently Asked Questions
What size optic tube does the DC-35150 fit?
This model is built specifically for 35mm scope tubes. RPM also offers the Delta series in 30mm and 34mm if your optic uses a different diameter, so double-check your scope's tube size before ordering. The 35mm option is popular with larger LPVOs and precision optics.
How high does the Delta 35mm cantilever sit?
The mount places the center of your optic at 1.50 inches above the rail. That height works well for a natural cheek weld and a lower-third co-witness with iron sights on most flat-top rifles. It's a common sweet spot for AR-pattern builds running magnified glass.
What torque specs should I use when installing this mount?
RPM recommends 18 in/lbs on the cap screws and 45 in/lbs on the cross bolt. Using a quality torque wrench keeps your clamping force even and protects the scope tube from being over-tightened. Sticking to spec also helps the mount hold zero over time.
Why choose a cantilever mount over standard rings?
A cantilever pushes the rings forward of the receiver, giving you proper eye relief on flat-top rifles where rail space is tight. Because it's a one-piece design, it keeps both rings perfectly aligned and clamps entirely to the receiver for a rock-solid, repeatable hold. That means no bridging headaches and no pinched tubes from misaligned rings.




Reviews
There are no reviews yet.