0
0

RPM CLR-35125 Precision 35mm High 1.25″ Scope Rings w/ Bubble Level

UPC: 850063702089

$174.99

8 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Rifle cant is one of those quiet accuracy killers that sneaks up on you at distance, and the RPM CLR-35125 tackles it head on. This 35mm high ring set from Rubicon Precision Manufacturing has a co-linear bubble level machined right into the design, sitting where you can glance at it from the shooting position using your non-dominant eye. No fumbling with a separate anti-cant device, no lifting your head off the comb to double-check level before a shot. The bubble is right there when you need it.

Where the RPM CLR-35125 Earns Its Keep

The co-linear level does double duty. During mounting, it gives you a clear reference to the rifle's cant so you can get the scope squared away without balancing multiple small levels on the rail and turret cap. Out in the field or on the line, that same level lets you confirm you're holding the rifle plumb before you break the shot. On longer shots, even a small amount of cant can push your point of impact off, and this design is built specifically to keep that from happening.

Build and Fit on the CLR-35125

These rings are made from 6061-T6 aluminum with 303 stainless steel cross bolts and hardware, and they include a top ring alignment lug that keeps the caps square during install. The 1.25" high height gives you the clearance needed for larger objective bells and big 35mm-tube optics common on precision and long-range rigs. They mount to standard Picatinny rails and ship as a matched set of two in black. Made in the USA out of Flagstaff, Arizona.

Recommended torque values are 18 in/lbs on the cap screws and 45 in/lbs on the cross bolt, and RPM prints them right on the box so you're not hunting for a tiny slip of paper. Folks who run these tend to point to the tight machining and the genuinely useful integrated level as the standout reasons they'd buy them again.

Key Specifications

  • Manufacturer: Rubicon Precision Manufacturing (RPM)
  • Manufacturer Part Number: CLR-35125
  • UPC: 850063702089
  • Tube Diameter: 35mm
  • Ring Height: High, 1.25"
  • Color: Black
  • Quantity: Set of 2 (matched pair)
  • Ring Material: 6061-T6 Aluminum
  • Hardware: 303 Stainless Steel cross bolt and screws
  • Mount Type: Picatinny
  • Integrated Level: Co-linear bubble level
  • Cap Screw Torque: 18 in/lbs
  • Cross Bolt Torque: 45 in/lbs
  • Country of Origin: Made in USA
  • Shipping Weight: 0.487 lbs

What’s Included

  • Set of 2 matched 35mm scope rings (high, 1.25")
  • Integrated co-linear bubble level
  • Cross bolts and cap screws

Frequently Asked Questions

What size scope tube do the RPM CLR-35125 rings fit?

These rings are built for optics with a 35mm main tube, which is a common diameter on higher-end long-range and precision scopes. They will not fit 30mm or 34mm tubes, so double-check your scope's tube spec before ordering. If you're running a 30mm or 34mm optic, RPM offers the same co-linear ring design in those diameters.

How does the co-linear bubble level actually work?

The level is machined into the ring set and positioned so you can see it from behind the rifle using your non-dominant eye. That means you can confirm your rifle is level without lifting your head off the stock or breaking your cheek weld. It also makes the initial scope mounting easier since you get a direct cant reference instead of balancing separate levels on the rail and turret.

Is the 1.25" high height the right choice for my setup?

The 1.25" high height is meant to clear larger objective bells and bulkier 35mm optics, which are typical on precision rigs. If your scope has a smaller objective or you want a lower cheek weld, RPM also makes these in medium (1.00") and low (0.885") heights. Measuring the gap between your rail and the bottom of your objective bell is the surest way to pick the right height.

What are the torque specs for the CLR-35125 rings?

RPM lists 18 in/lbs on the cap screws and 45 in/lbs on the cross bolt, and they print those numbers right on the box. Using a quality torque wrench and going in a cross pattern on the cap screws will give you an even clamp on the scope. Sticking to the spec keeps your optic secure without over-stressing the tube.

Additional information

UPC

850063702089

Manufacturer

Manufacturer Part Number

CLR-35125

Shipping Weight

0.487

Reviews

There are no reviews yet.

Be the first to review “RPM CLR-35125 Precision 35mm High 1.25″ Scope Rings w/ Bubble Level”