0
0

RPM CLR-35125-FDE 35mm High Scope Rings 1.25″ Co-Linear FDE

UPC: 850063702393

$199.99

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Getting your reticle truly level is one of those small details that makes a big difference downrange, and these RPM CLR-35125-FDE rings are built to solve that problem in a smart way. Instead of clamping a separate anti-cant level onto your rail or scope tube, Rubicon Precision Manufacturing built the bubble right into the ring set. The bubble sits low and stays visible from behind the rifle, so you can confirm your rifle is level with your non-dominant eye before you break the shot. This is a 35mm ring set in the tall 1.25" high configuration, dressed in a Flat Dark Earth finish that pairs nicely with FDE rifles and darker earth-tone builds.

What the Co-Linear Level Brings to the RPM 35mm Rings

The whole idea behind the co-linear design is that the bubble references the cant of the rifle during mounting, which takes the balancing acts and multiple little levels out of the equation. It gives you a clean, repeatable way to square up your optic and check it in the field without breaking position. That reference point matters more the farther you stretch out, since even a small amount of cant throws your bullet off at distance.

Build and Fit on the CLR-35125-FDE

These are machined in the USA from 6061-T6 aluminum for the ring body and cap, with 303 stainless steel cross bolt and hardware for the clamping duties. There is a top ring alignment lug that keeps the cap and base squared up during cap screw installation, which helps things seat evenly around the scope tube. They mount to standard Picatinny rails and fit any 35mm main tube optic.

Mounting Your Scope With the RPM Rings

One detail folks appreciate is that the recommended torque values are printed right on the packaging rather than a loose slip of paper you toss in a drawer. RPM lists roughly 18 in-lbs on the cap screws and 45 in-lbs on the cross bolt. Snug things down in an even cross pattern, use the built-in level to square your reticle, and you are set to head to the range.

Key Specifications

  • Manufacturer: Rubicon Precision Manufacturing (RPM)
  • Manufacturer Part Number: CLR-35125-FDE
  • UPC: 850063702393
  • Tube Diameter: 35mm
  • Ring Height: High (1.25")
  • Color / Finish: Flat Dark Earth (FDE)
  • Ring Body & Cap Material: 6061-T6 Aluminum
  • Cross Bolt & Hardware: 303 Stainless Steel
  • Mounting Interface: Picatinny
  • Integrated Level: Co-Linear Bubble Level
  • Alignment Feature: Top Ring Alignment Lug
  • Quantity: Set of 2 Rings
  • Cap Screw Torque: 18 in-lbs
  • Cross Bolt Torque: 45 in-lbs
  • Country of Origin: Made in USA

What’s Included

  • Set of 2 RPM 35mm scope rings (high 1.25")
  • 303 stainless steel cross bolts and mounting hardware

Frequently Asked Questions

What makes the co-linear bubble level on the RPM CLR-35125-FDE different from a standard scope level?

The bubble is built into the ring set itself and sits low so it stays visible from behind the rifle. That means you can check your level with your non-dominant eye without lifting your head off the stock or reaching up to a rail-mounted level. It also helps you square the reticle during mounting by showing the cant of the rifle in real time.

Will these 35mm rings fit my rifle and scope?

These rings clamp to standard Picatinny rails and are cut for optics with a 35mm main tube, so check your scope's tube diameter before ordering. The high 1.25" height is popular for larger objective bells and bulkier tactical or long-range optics that need clearance over the barrel. If your scope has a 30mm or 34mm tube, RPM offers those diameters in a separate ring set.

What torque specs should I use when mounting the CLR-35125-FDE rings?

RPM recommends about 18 in-lbs on the cap screws and 45 in-lbs on the cross bolt. The nice part is those numbers are printed right on the packaging so you always have them handy. Tighten the cap screws in an even cross pattern for consistent clamping around the scope tube.

Are these rings durable enough for hard-recoiling rifles?

The ring body and cap are machined from 6061-T6 aluminum with 303 stainless steel cross bolt and hardware, and they are made in the USA. A top ring alignment lug keeps the cap and base squared during installation, which helps everything seat evenly. That combination gives you a solid, repeatable mount that holds zero on serious rigs.

Additional information

UPC

850063702393

Manufacturer

Manufacturer Part Number

CLR-35125-FDE

Reviews

There are no reviews yet.

Be the first to review “RPM CLR-35125-FDE 35mm High Scope Rings 1.25″ Co-Linear FDE”