0
0

RPM CLR-35100 Precision 35mm Scope Rings, Medium 1.00″ w/ Bubble Level

UPC: 850063702072

$174.99

22 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The RPM CLR-35100 solves one of the most overlooked problems in long range shooting: rifle cant. Ruff's Precision built the bubble level directly into the bottom half of the ring instead of sticking it on top, which makes it co-linear to your rifle once the scope is mounted. The result is a level you can glance at with your non-dominant eye while staying behind the glass, no head lift and no breaking your firing position. For 35mm tube scopes that need that extra reference at distance, this is a clean, purpose built setup.

What the Co-Linear Bubble Does on the CLR-35100

Because the level sits in the base rather than the top cap, you don't have to fuss over perfectly aligning a separate indicator during install. When you're mounting an optic, that bubble gives you a real-time read on whether the platform itself is level, which cuts out the old balancing act of juggling two or three small levels that never seem to agree. Level the rifle, line up the scope, torque the caps, and you're squared away. Even a little cant has an outsized effect downrange, and this takes that variable off the table.

Build and Materials of the RPM 35mm Medium Rings

The ring body and cap are machined from aircraft-grade 6061-T6 aluminum, paired with a 303 stainless steel cross bolt and nut for a solid clamp on a Picatinny rail. An alignment lug on the top ring helps keep the cap and base true during cap screw installation. At the medium height, these position the center of the scope tube one inch above the base, which suits a lot of mid to large objective optics without going sky high. Recommended torque is 18 in/lbs on the cap screws and 45 in/lbs on the cross bolt, and those numbers are printed right on the box so you're not hunting for a tiny spec sheet.

These are made in the USA, and folks who've run them tend to call out the smooth, catch-free machining and how easy the whole mounting process becomes with the level built in.

Key Specifications

  • Manufacturer: Ruff's Precision (RPM)
  • Model / MPN: CLR-35100
  • UPC: 850063702072
  • Ring Size: 35mm
  • Height: Medium (1.00")
  • Ring Material: 6061-T6 Aluminum
  • Cross Bolt & Hardware: 303 Stainless Steel
  • Integrated Level: Co-Linear Bubble Level (bottom of ring)
  • Mount Type: Picatinny
  • Cap Screw Torque: 18 in/lbs
  • Cross Bolt Torque: 45 in/lbs
  • Quantity: Ring Pair (Set)
  • Country of Origin: Made in USA
  • Shipping Weight: 0.453 lbs

What’s Included

  • Pair of RPM CLR-35100 35mm medium height scope rings
  • 303 stainless steel cross bolt and nut hardware
  • Cap screws

Frequently Asked Questions

Where is the bubble level on the RPM CLR-35100 rings?

The level is built into the bottom half of the ring rather than the top cap, which makes it co-linear to your rifle once the scope is mounted. It's positioned to be viewed with your non-dominant eye while you're behind the scope, so you get a quick level check without lifting your head or breaking your firing position. That bottom placement also means you don't have to worry about perfectly aligning the top ring for the level to read true.

What size scope tube do these fit?

The CLR-35100 is built specifically for 35mm scope tubes. If your optic has a 30mm or 34mm tube, you'll want a different model, since Ruff's Precision makes the same co-linear bubble ring in those diameters as well.

How tall are the medium 1.00" rings?

Medium height places the center of the scope tube one inch above the base. That's a versatile height that clears a lot of mid to large objective lenses without raising the optic unnecessarily high. If you're running a very large objective, you may want to confirm clearance against your particular barrel and rail setup first.

What rail do the CLR-35100 rings mount to and what are the torque specs?

These clamp onto a Picatinny rail using the 303 stainless steel cross bolt. Ruff's Precision recommends torquing the cap screws to 18 in/lbs and the cross bolt to 45 in/lbs, and those values are printed right on the box so you don't have to track down a loose instruction sheet.

Additional information

UPC

850063702072

Manufacturer

Manufacturer Part Number

CLR-35100

Shipping Weight

0.453

Reviews

There are no reviews yet.

Be the first to review “RPM CLR-35100 Precision 35mm Scope Rings, Medium 1.00″ w/ Bubble Level”