Description
Getting a scope mounted dead level is one of those small jobs that quietly wrecks your long-range accuracy when it goes wrong. The RPM CLR-34885-FDE tackles that head on with a co-linear bubble level built into the bottom half of the ring instead of clipped to the top. Because the level sits in the base, it reads the actual cant of your rifle in real time as you mount, so you're not balancing multiple small levels against each other and hoping they agree. These are a 34mm, low-height set that positions the center of your scope tube .885 inches above the base, and they're cut for Picatinny rails.
What Sets the CLR-34885-FDE Apart
Cant has a real effect downrange, and it gets worse the farther you stretch things out. Having the bubble machined co-linear to the platform means you get a quick level reference while you're actually behind the glass, visible with your non-dominant eye right before the shot. Folks who've run these tend to call out the clean machine work and how the base-mounted level just makes more sense than the usual top-ring setup. It's a small design choice that saves a lot of fuss at the bench.
Build and Fit on the CLR-34885-FDE Rings
The ring body and cap are 6061-T6 aluminum with a 303 stainless steel cross bolt and nut, and there's an alignment lug to keep the cap and base squared up while you run the cap screws. Everything is proudly made in the USA. RPM lists torque values of 18 in/lbs on the cap screws and 45 in/lbs on the cross bolt, and the low set weighs in around 3.9 oz. The Flat Dark Earth finish pairs nicely with a lot of today's chassis and rifle builds.
One thing worth checking before you order: low rings clear best when your action or chassis does not run a continuous top rail. If you're building a longer scope with a big objective, you may want to size up to medium instead.
Key Specifications
- Manufacturer: Ruff's Precision Manufacturing (RPM)
- Manufacturer Part Number: CLR-34885-FDE
- UPC: 850063702362
- Ring Diameter: 34mm
- Height: Low (.885" tube center from base)
- Color: Flat Dark Earth (FDE)
- Ring Body & Cap Material: 6061-T6 Aluminum
- Cross Bolt & Nut: 303 Stainless Steel, 1/2"
- Base Compatibility: Picatinny
- Integrated Level: Co-Linear Bubble Level (base-mounted)
- Cap Screw Torque: 18 in/lbs
- Cross Bolt Torque: 45 in/lbs
- Weight: Approx. 3.9 oz
- Country of Origin: USA
What’s Included
- Set of 2 RPM 34mm low scope rings (ring bodies and caps)
- 303 stainless steel cross bolts and nuts
- Cap screws
Frequently Asked Questions
What makes the co-linear bubble level on the CLR-34885-FDE different from other level setups?
The bubble level is machined into the bottom half of the ring instead of clipped onto the top ring or scope tube. That means it reads the actual cant of your rifle platform in real time as you mount, so you're not trying to reconcile several small levels at once. Once the scope is set, the bubble stays visible behind the glass with your non-dominant eye for a fast check before the shot.
Will these low .885" rings clear my objective and action?
Low rings put the center of your 34mm tube .885 inches above the base, which works great for many builds but leaves less room for large objectives. RPM notes that low height clears best when your action or chassis does not have a continuous top rail. If you're running a big objective or a chassis with a full-length rail, medium height is often the safer call.
What rifles and rails do the CLR-34885-FDE rings fit?
These rings are cut for Picatinny rails, which covers the majority of modern bolt actions, chassis systems, and flat-top setups. They're sized for 34mm scope tubes, so they'll fit popular optics like a Nightforce ATACR or Leupold Mark 5HD in that diameter. Always confirm your scope tube is 34mm before ordering.
What torque values should I use when mounting these rings?
RPM recommends 18 in/lbs on the cap screws and 45 in/lbs on the cross bolt. Use a quality torque wrench and tighten the cap screws evenly in a cross pattern to keep the ring gaps balanced. The built-in alignment lug helps keep the cap and base squared up during installation.




Reviews
There are no reviews yet.