Description
Ruff's Precision built the CLR-30125-FDE around a simple idea that solves a real headache at the range: seeing your rifle's cant without lifting your head off the scope. The co-linear bubble level sits in a spot you can glance at with your non-dominant eye from behind the optic, giving you a quick level check right before you press the trigger. That flat dark earth finish pairs nicely with a lot of today's tan and FDE builds, and the 1.25" high height gives you clearance for larger objective bells and bigger 30mm tubes.
What the Co-Linear Level Brings to the CLR-30125-FDE
Most of us have wrestled with balancing a couple of small bubble levels during a scope install. This set does away with that circus. The integrated level gives you a reference to the rifle's cant during mounting, so you level the rifle, level the scope, and torque down the caps without the guesswork. Once it's dialed, that same level keeps working for you every time you settle behind the gun. It's the kind of feature that earns its keep whether you're stretching things out at distance or just want a cleaner, more repeatable setup.
Build and Fit on the 30mm High Rings
These rings clamp to Picatinny rails and use an alignment lug to keep the cap and base squared up during cap screw installation, which helps everything sit true. Ruff's recommends 18 in/lbs on the cap screws and 45 in/lbs on the cross bolt, and you'll find the specs printed on the box rather than a tiny slip of paper that always seems to disappear. Grab a good torque wrench for the install, because eyeballing ring screws is a fast track to chasing your zero all afternoon.
Proudly made in the USA, this set is a solid pick for anyone running a 30mm optic who wants a stable foundation and a built-in leveling reference in one clean package.
Key Specifications
- Manufacturer: Ruff's Precision Manufacturing (RPM)
- Manufacturer Part Number: CLR-30125-FDE
- UPC: 850063702331
- Ring Diameter: 30mm
- Height: High, 1.25"
- Color/Finish: Flat Dark Earth (FDE)
- Mount Type: Picatinny compatible
- Integrated Level: Co-linear bubble level
- Alignment: Alignment lug for cap/base squaring
- Cap Screw Torque: 18 in/lbs
- Cross Bolt Torque: 45 in/lbs
- Sold As: Set of 2 rings
- Country of Origin: Made in the USA
What’s Included
- Set of two 30mm high (1.25") riflescope rings with integrated co-linear bubble level
- Ring cap hardware
- Cross bolt and nut
Frequently Asked Questions
What scope tube size do the CLR-30125-FDE rings fit?
These rings are built for 30mm main tube optics. Make sure your scope's tube diameter is listed as 30mm, which you'll usually find on the manufacturer's site or in your scope's manual. Matching the ring bore to your exact tube diameter is key for a proper, secure fit.
How does the co-linear bubble level actually work on these rings?
The level is positioned so you can read it with your non-dominant eye while staying behind the scope, so you never have to lift your head to check cant. It also doubles as your leveling reference during install, letting you skip the juggling act of multiple small bubble levels. A quick glance confirms the rifle is level before you break the shot.
Will the 1.25" high height give me enough clearance for a large objective?
The 1.25" high setup positions the center of the tube higher off the rail than medium or low rings, which helps clear larger objective bells and bigger scope housings. It's a common choice for precision and long-range optics with sizable objectives. If you're running a smaller objective, a medium or low height may sit your scope closer to the bore.
What torque specs should I use when mounting these rings?
Ruff's Precision lists 18 in/lbs for the cap screws and 45 in/lbs for the cross bolt, and those specs are printed right on the box. Use a quality torque wrench rather than guessing, since over- or under-tightening is a common cause of lost zero. Level the rifle, level the scope, then torque the caps down in a cross pattern for even clamping.





Reviews
There are no reviews yet.