0
0

RPM Bravo 30mm Cantilever Scope Mount 1.50″ FDE w/ Bubble Level

UPC: 850063702164

$284.99

9 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Ruff's Precision built the Bravo 30mm Cantilever Mount for folks who want their glass sitting dead level and staying put. It positions a 30mm optic at a 1.50" center height, and the forward cantilever gives you extra room to slide the scope back and forth until your eye relief feels right. That flexibility matters whether you're running a flat-top AR or a bolt gun with a full-length rail, since getting the eyebox dialed is half the battle with any new build.

What Sets the Bravo Cantilever Mount Apart

The standout feature here is the integrated co-linear bubble level. It's set into the mount body where you can see it from your non-dominant eye while you're behind the gun, so you've got a quick cant reference before the shot. During mounting, it takes the guesswork out of leveling your reticle and spares you the balancing act of stacking small levels on turret caps and rails. It's a small thing that makes a real difference when you're trying to get a clean, repeatable zero.

Build and Hardware on the RPM Bravo Mount

The body and caps are machined from 6061-T6 aluminum, with a 303 stainless steel 1/2" cross bolt and nut holding it to the rail. There's an integrated recoil lug that keeps the mount from walking under recoil, plus an alignment lug that keeps the cap and base lined up when you're snugging down the cap screws. The FDE Cerakote finish shrugs off wear and pairs nicely with tan and earth-tone rifles. In the 30mm configuration it tips the scale at a trim 5.7 ounces, and it's proudly made in the USA.

Getting the Bravo 30mm Dialed In

Ruff's lists clear torque values to take the mystery out of install: 18 in-lbs on the cap screws and 45 in-lbs on the cross bolt. Having those numbers spelled out means you can mount with confidence instead of guessing, and a solid inch-pound wrench will get you there every time.

Key Specifications

  • Manufacturer: Ruff's Precision (RPM)
  • Model: Bravo 30mm Cantilever Mount
  • Manufacturer Part Number: BC-30150-FDE
  • UPC: 850063702164
  • Ring Diameter: 30mm
  • Center Height: 1.50" to center of optic
  • Cantilever Offset: 1.50" forward
  • Body Material: 6061-T6 aluminum body and caps
  • Hardware: 303 stainless steel 1/2" cross bolt and nut
  • Integrated Features: Co-linear bubble level, recoil lug, alignment lug
  • Finish: FDE Cerakote
  • Weight: 5.7 oz
  • Cap Screw Torque: 18 in-lbs
  • Cross Bolt Torque: 45 in-lbs
  • Country of Origin: Made in USA

What’s Included

  • RPM Bravo 30mm Cantilever Mount (FDE)
  • 303 stainless steel 1/2" cross bolt and nut
  • Cap screws

Frequently Asked Questions

What size optic does the RPM Bravo Cantilever Mount fit?

This model is built specifically for 30mm main tube optics. Ruff's also offers the Bravo in 34mm and 35mm configurations if your scope has a larger tube, so double-check your optic's tube diameter before ordering.

How does the co-linear bubble level work on the Bravo mount?

The level is built right into the mount body and positioned so you can glance at it with your non-dominant eye while you're behind the gun. It gives you a fast cant reference before the shot and makes leveling your reticle during mounting a lot simpler. You skip the usual juggling act of balancing small levels on your turret caps and rail.

What are the recommended torque values for installing the Bravo 30mm mount?

Ruff's Precision calls for 18 in-lbs on the cap screws and 45 in-lbs on the cross bolt. A quality inch-pound torque wrench is the way to go so you don't over-tighten or leave anything loose. A dab of blue threadlocker on the cross bolt is a common move to keep things from walking under recoil.

Does the Bravo mount have a recoil lug?

Yes, it has an integrated recoil lug that keeps the mount from shifting on the rail under recoil. There's also an alignment lug that keeps the cap and base lined up correctly when you're tightening the cap screws, which helps with a clean, repeatable install.

Additional information

UPC

850063702164

Manufacturer

Manufacturer Part Number

BC-30150-FDE

Shipping Weight

0.656

Reviews

There are no reviews yet.

Be the first to review “RPM Bravo 30mm Cantilever Scope Mount 1.50″ FDE w/ Bubble Level”