Description
The Rosco Manufacturing ROS-NGB-002 Non-Adjustable Gas Block V2 is a low-profile .750 gas block built for AR-15 direct impingement builds. It's part of Rosco's Bloodline family, the company's hardest-working gear, and it's designed to sit under a slim handguard without any fuss. This version carries the same dependability the line is known for, with a few smart tweaks that make life easier on the bench.
What Sets the ROS-NGB-002 V2 Apart
The headline change on the V2 is a knockout hole added to the front of the block. Anyone who has fought a stubborn gas tube during a barrel swap knows how welcome that is. Pop a punch through the hole and the tube backs out without the usual wrestling match. Rosco also tightened up the tolerances and cleaned up the finish on this generation, so fit is more consistent from one block to the next and it holds up over the long haul.
Built to Line Up with Rosco Barrels
This gas block is a direct plug-in for Rosco's own barrels, machined so the port lines up dead-on with the gas port for reliable cycling. That said, it works on any standard .750 barrel journal, which makes it an easy grab whether you're finishing a Rosco upper or piecing together your own build. It has provisions for pinning, so you can set screw it or dimple and pin it depending on how permanent you want the setup.
Hardware Included, No Extra Trip
One detail builders appreciate: Rosco throws in the hardware. Each block ships with two set screws and two roll pins, so you're not making a separate parts run to finish the install. It's made in the USA and runs a durable black finish that shrugs off the heat and grime that comes with hard use. For a clean, no-nonsense gas block that just works, this one earns its spot in the toolbox.
Key Specifications
- Manufacturer: Rosco Manufacturing
- Model: Non-Adjustable Gas Block V2
- Manufacturer Part Number: ROS-NGB-002
- UPC: 850039693342
- Type: Non-Adjustable, Low-Profile
- Journal / Bore Diameter: .750 in
- Mounting: Set screw with provisions for pinning
- Finish: Black
- Platform: AR-15 Direct Impingement
- Series: Bloodline
- Country of Origin: Made in USA
- Dimensions: 4 x 1.5 x 1.5 in
What’s Included
- Rosco Non-Adjustable Gas Block V2 (.750)
- 2 set screws
- 2 roll pins
Frequently Asked Questions
What barrel size does the Rosco ROS-NGB-002 gas block fit?
The V2 Non-Adjustable Gas Block is built for a .750 inch barrel journal, which is the most common diameter on AR-15 barrels. It's a direct plug-in for Rosco's own barrels since the port is machined to line up with their gas ports. It'll also mount on any standard .750 barrel with the same journal.
Does the ROS-NGB-002 come with the set screws and roll pins?
Yes. Each Rosco Non-Adjustable Gas Block V2 ships with two set screws and two roll pins in the box. A lot of gas blocks make you source that hardware separately, so having it included saves you a trip and lets you finish the install right away.
Can this gas block be pinned to the barrel?
It has provisions for pinning, so you can go beyond just set screws if you want a more permanent, secure hold. Keep in mind your barrel needs to be dimpled or cut for the pins to seat properly. Many builders run it set-screwed with thread locker, then pin it if their barrel is prepped for it.
What's new on the V2 compared to the original Rosco gas block?
The biggest update is a knockout hole added to the front of the block that makes removing the gas tube much easier during install or service. Rosco also improved the machining tolerances and the finish on the V2 for a more consistent fit and better durability. It carries the same Bloodline dependability the original was known for.



Reviews
There are no reviews yet.