$22.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Every AR build lives and dies by its gas system, and the gas tube is the one part doing quiet, thankless work every single shot. The Rosco ROS-GT-M-001 is built to shrug off that abuse. It's a mid-length tube treated with a Black Nitride (Melonite) finish, which is the same surface hardening you see on quality bolt carriers and barrels. That treatment digs into the metal rather than sitting on top of it, so you get better corrosion resistance, more wear resistance, and improved fatigue strength compared to a plain untreated tube.
This one is made for barrels set up with a mid-length gas system, typically 16 to 18 inch builds. Mid-length gas gives you a longer dwell time than a carbine setup, which usually translates to a softer recoil impulse and less beating on your bolt carrier and buffer components. It also opens up room for a longer handguard, which shooters tend to love for hand placement and mounting real estate. A mid-length tube runs right around 11.75 inches, so make sure your barrel's gas port is spaced for mid-length before ordering.
Gas tubes spend their whole life buried under a handguard, soaking up heat and carbon with zero airflow. That's exactly the environment where a bare tube starts to show its age. The Melonite treatment on the Rosco tube helps it stay clean-looking and structurally sound long after a standard tube would be crusted over. It's a small part, but the finish is the difference between a tube you forget about and one you're fighting to remove down the road.
Installation is standard stuff for anyone who's built an upper. The tube slides into your gas block and pins in place, then feeds into the gas key on your bolt carrier group. Rosco designs these to pair cleanly with their own Bloodline barrels and gas blocks, but the dimensions are mil-spec friendly, so it plays nice across the platform. Keep in mind this tube does not ship with a roll pin, since Rosco includes those with their gas blocks.
This tube is set up for barrels running a mid-length gas system, most commonly 16 to 18 inch builds. Mid-length gas ports sit farther from the chamber than carbine ports, which is what gives you that smoother recoil impulse. Just confirm your barrel is stamped or spec'd for mid-length gas before ordering.
No, this gas tube ships without a roll pin. Rosco includes roll pins with their gas blocks instead, so if you're building from scratch you'll want to grab a pin or a Rosco gas block to go with it. Most builders already have spare roll pins on hand.
The Black Nitride, also called Melonite, is a surface hardening treatment that boosts corrosion resistance, wear resistance, and fatigue strength. Since gas tubes live under the handguard soaking up heat and carbon with no airflow, that finish helps the tube stay sound and clean-looking a lot longer than a bare tube. It's the same style of treatment used on quality barrels and bolt carriers.
A mid-length gas tube runs approximately 11.75 inches. That's longer than a carbine tube and shorter than a rifle-length tube. If you're unsure what you have, measuring your current tube or the distance from your gas block to the receiver is the easiest way to confirm.
| UPC | 181969500883 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | ROS-GT-M-001 |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.