Description
The RR3 Raptor Optima HP is the choke you reach for when the birds are hanging out past comfortable range and you need every pellet working. It's the tightest constriction in the Raptor lineup built for long-range work, tuned specifically for geese and those open-water ducks that never quite finish the way you'd like. Rob Roberts Gun Works built its reputation on chokes that pattern tighter and hit harder than factory tubes, and this one carries that same DNA into a 20 gauge package for Beretta Optima HP guns like the A400 and 1301.
What Sets the RR3 Raptor Apart
The Raptor series was designed around wing shooting, taking the proven idea behind the Triple Threat chokes and adding newer machining technology to squeeze out a hotter core pattern. Instead of the traditional knurling you'll find on older tubes, the Raptor chokes wear machined claw marks that give you solid grip when you're threading it in with cold, wet hands. It's finished in E-Series Cerakote, so it holds up to salt spray, mud, and the general abuse that comes with a hard duck season.
Built From 17-4 PH U.S. Stainless
Every Raptor choke is cut from 17-4 PH American stainless steel and machined to tolerances tighter than the industry norm. That matters because the internal cuts are what actually control how your shot column releases, and sloppy machining throws patterns off. Pair the RR3 with quality steel, bismuth, or the load your gun likes best, and pattern it on paper before the hunt to see where it shines.
Fitment and Fit Notes
This tube is cut for the Beretta Optima HP system, covering 20 gauge A400 and 1301 shotguns. One thing worth knowing up front: on over-shotguns, the Raptor design only allows a choke in a single barrel, so it's not a set-both-tubes situation. For a semi-auto or pump running the Optima HP thread, it drops right in and gets to work.
Key Specifications
- Manufacturer: Johnny Stewart / Rob Roberts Gun Works
- Manufacturer Part Number: 200321
- UPC: 810174902303
- Gauge: 20 Gauge
- Choke System: Beretta Optima HP
- Compatible Shotguns: Beretta A400 and 1301 (20 GA)
- Constriction / Model: RR3 Raptor (long-range)
- Best Use: Geese and open-water ducks
- Material: 17-4 PH U.S. Stainless Steel
- Finish: E-Series Cerakote
- Exterior Grip: Machined claw marks (extended)
What’s Included
- RR3 Raptor Optima HP 20 Gauge choke tube
Frequently Asked Questions
What shotguns does the RR3 Raptor Optima HP 20 gauge choke fit?
This choke is machined for the Beretta Optima HP thread system, which covers 20 gauge A400 and 1301 shotguns. If your barrel is stamped Optima HP, this tube will thread right in. Always double-check the choke system marked on your barrel before ordering.
What kind of hunting is the RR3 Raptor best suited for?
The RR3 is the long-range choke in the Raptor lineup, built specifically for geese and open-water ducks that hang out past normal range. Its internal cuts stack a dense core pattern to keep pellets on target at distance. For closer decoying birds, the RR1 or RR2 constrictions open things up more.
Does the RR3 Raptor work with steel and non-toxic shot?
Yes, the 17-4 PH stainless build handles steel just fine, and hunters have reported excellent patterns with loads like bismuth as well. The key is patterning the choke with your specific load on paper before the hunt, since every gun and shell combo behaves a little differently. Match the tube to a quality waterfowl load and it earns its keep.
Why does the Raptor choke have those grooves on the outside?
Those are machined claw marks that replaced the older knurling found on Rob Roberts chokes. They give you better grip when threading the tube in and out, which is a real advantage with cold, wet, gloved hands in the marsh. It's a small detail that hunters appreciate in the field.



Reviews
There are no reviews yet.