Description
When the birds are hanging wide and your buddies are barely reaching them, the RR3 Raptor is the tube built for that exact situation. This is the tightest constriction in the Raptor lineup from Rob Roberts Gun Works, made specifically for long-range work on geese and open-water ducks. The internal geometry is cut to stack a hot, dense core pattern well past 40 yards, so those long passing shots turn into folded birds instead of feathers.
What Sets the RR3 Raptor Apart
The Raptor series was built off years of pattern testing and refinement, using newer internal cut technology to deliver a hotter core than a standard aftermarket choke. Where the RR1 handles close range and the RR2 covers mid-range duck and dove work, the RR3 is the reach-out-and-touch-it option. Pair it with quality steel or non-toxic waterfowl loads and pattern your gun to find the sweet spot, since every barrel and load combo throws a little differently.
Built From 17-4 PH Stainless
This tube is machined from 17-4 PH U.S. stainless steel, which is exactly what you want sitting in a wet, muddy, salt-air blind all season. It shrugs off corrosion and holds its tolerances shot after shot. The extended, ported portion wears a Cerakote finish with machined claw marks instead of traditional knurling, giving you plenty of grip to hand-tighten and remove it even with cold, wet fingers.
Mobil Choke Fitment for 12 Gauge
This is the Mobil pattern version, which covers Beretta Mobil, Benelli Mobil (SBE1, Super 90), and Franchi standard 12 gauge systems. Always double-check your shotgun's choke thread pattern before ordering so you get the right fit. If you shoot an over-under, keep in mind the Raptor design goes in one barrel only. Confirm the gun is unloaded, thread it in by hand, and check tightness now and then during a long shoot.
Key Specifications
- Model: RR3 Raptor Mobil
- Gauge: 12 Gauge
- Constriction Use: Long-range waterfowl (geese, open-water ducks)
- Material: 17-4 PH U.S. Stainless Steel
- Style: Extended, ported
- Finish: Cerakote with machined claw marks
- Fitment: Mobil pattern (Beretta Mobil, Benelli Mobil SBE1/Super 90, Franchi Standard)
- Brand: Rob Roberts Gun Works
- Manufacturer Part Number: 200306
- UPC: 810174902150
What’s Included
- Rob Roberts RR3 Raptor Mobil choke tube (1)
Frequently Asked Questions
What is the RR3 Raptor choke tube best used for?
The RR3 is the long-range specialist in the Raptor series, designed with geese and open-water ducks in mind. Its internal cuts create a dense core pattern that holds together well past 40 yards. If most of your shots are stretched out and passing, this is the constriction to reach for.
Will the Mobil version fit my shotgun?
This tube fits Mobil pattern 12 gauge guns, which includes Beretta Mobil, Benelli Mobil (SBE1 and Super 90), and Franchi standard systems. Choke threads vary between makers and even between models from the same brand, so verify your gun's exact pattern before ordering. When in doubt, check your owner's manual or the markings on your factory choke.
What shot can I run through the RR3 Raptor?
It's built to perform with quality steel and other non-toxic waterfowl loads, which is what most goose and duck hunters are shooting. As with any choke, take it to the patterning board with your chosen loads to find what your barrel likes best. Different shot sizes and brands can shift your pattern noticeably.
Can I use the RR3 Raptor in both barrels of an over-under?
No, the Raptor design only allows for placement in one barrel of an over-under. You'll want to run it in your preferred barrel and pair it with a standard tube in the other. The 17-4 PH stainless construction holds up great in wet, harsh conditions either way.




Reviews
There are no reviews yet.