0
0

Rob Roberts TSS Raptor Invector Plus 12 Gauge Choke Tube 200297

UPC: 810174902068

$123.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've made the jump to TSS and your factory choke just isn't wringing the most out of that expensive tungsten, this is the tube built to fix that. The Rob Roberts TSS Raptor is part of the Johnny Stewart RRaptor Series and it's engineered around one job: getting the tightest, most even patterns possible out of premium Tungsten Super Shot. Because TSS is so dense and hard compared to lead or steel, it responds differently at the constriction, and this choke's internal geometry is cut to take advantage of that. The result is a hotter core pattern that reaches out farther than most folks expect from a wing gun.

What Sets the TSS Raptor Apart

These aren't blank tubes with a fresh label. They come out of years of iterative development and get machined on modern equipment to tolerances well past the usual industry standard. The body is 17-4 PH U.S. stainless steel, which is the same corrosion-resistant grade you want in a choke that lives in a duck blind or a wet turkey woods. It holds up to hard use, cleans up easy, and won't pit on you after a soggy morning. The Raptor line also carries the signature machined claw marks instead of standard knurling, so grip is solid even with cold, wet hands.

Fitting the TSS Raptor to Your Shotgun

This one is cut for the Browning and Winchester Invector Plus system, so it threads into 12 gauge barrels stamped Invector Plus (+). That covers a wide swath of guns including the Browning Gold, Silver, Maxus, Cynergy, Citori, BPS, and Winchester SX2, SX3, SX4, and SXP. Standard Invector and Invector-DS barrels use different threads and won't accept this tube, so it's worth a quick glance at your barrel stamp before ordering. One thing to know on over-and-unders: the Raptor design is meant to run in a single barrel only, not both.

Bottom line, if you're feeding your 12 gauge quality tungsten loads for ducks, geese, or long-bearded toms, this is the choke that lets that ammo do what you paid for.

Key Specifications

  • Manufacturer: Johnny Stewart / Rob Roberts Gun Works
  • Manufacturer Part Number: 200297
  • UPC: 810174902068
  • Model: TSS Raptor
  • Gauge: 12 Gauge
  • Choke System: Browning/Winchester Invector Plus
  • Material: 17-4 PH U.S. Stainless Steel
  • Intended Shot Type: Tungsten Super Shot (TSS)
  • Application: Wing Shooting / Waterfowl / Turkey
  • Grip Feature: Machined claw marks
  • Series: RRaptor Series

What’s Included

  • One (1) Rob Roberts TSS Raptor Invector Plus 12 gauge choke tube

Frequently Asked Questions

Will the TSS Raptor fit my shotgun?

This choke is threaded for the Browning and Winchester Invector Plus system, so it fits 12 gauge barrels stamped Invector Plus (+). That includes guns like the Browning Gold, Silver, Maxus, Cynergy, Citori, and BPS, along with the Winchester SX2, SX3, SX4, and SXP. Standard Invector and Invector-DS barrels use different threads and are not compatible, so check the stamp on your barrel first.

Do I have to shoot TSS through this choke?

The TSS Raptor is engineered specifically around Tungsten Super Shot, and that's where it truly shines with dense, consistent patterns. TSS is much harder and denser than lead or steel, so the internal cuts are tuned for how that shot behaves at the constriction. You'll get the best downrange results feeding it quality tungsten loads.

Can I run this choke in both barrels of my over-and-under?

No, the Raptor design is intended for a single barrel only. The way the choke is built does not allow it to be placed in both barrels of an over-and-under. Pick your primary barrel and set it up there.

Is stainless steel really necessary for a hunting choke?

For waterfowl and turkey work, yes, it makes a real difference. The 17-4 PH U.S. stainless steel resists corrosion in wet blinds and damp woods, so it won't pit or seize up after a rough morning. It also cleans up quickly and holds its tolerances season after season.

Additional information

UPC

810174902068

Manufacturer

Manufacturer Part Number

200297

Caliber/Gauge

12 Gauge

Reviews

There are no reviews yet.

Be the first to review “Rob Roberts TSS Raptor Invector Plus 12 Gauge Choke Tube 200297”