0
0

Johnny Stewart RR2 Raptor Invector 20 Gauge 17-4 PH Stainless Choke

UPC: 810174902013

$123.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The RR2 sits right in the sweet spot of the Raptor lineup, tuned for mid-range wing shooting where you need your pattern to hold together at working distances instead of blowing wide open or pinching down too tight. It's the choke you reach for when the ducks are decoying in and the doves are cutting past at that awkward middle range. The internal cuts are machined to deliver a hotter, denser core pattern when you feed it the right loads, which is exactly what makes the difference on birds that don't want to fold on the first shot.

What Sets the RR2 Raptor Apart

The Raptor series took what the Triple Threat chokes were built around and layered in newer machining tech to push that core pattern even harder. This one is cut for the 20 gauge Invector thread pattern, so it drops into a lot of the common pumps and autos running that setup. The tubes wear a Cerakote finish on the extended portion and swap the old-style knurling for machined claw marks, which look sharp and give you plenty of grip when you're threading it in with cold hands.

Built From 17-4 PH Stainless

Every Raptor choke is machined from 17-4 PH U.S. stainless steel, which is the good stuff for handling steel shot and years of hard field use without eating itself up. Rob Roberts Gun Works holds these to tolerances well past the industry norm, and that consistency is a big part of why the patterns come out so even. It's a premium tube that earns its keep season after season.

If you're chasing ducks over decoys or knocking down dove on an evening field, this is the constriction that matches that game. One note worth passing along: on over/under shotguns, the Raptor design only goes in one barrel, not both.

Key Specifications

  • Manufacturer: Johnny Stewart / Rob Roberts Gun Works
  • Model: RR2 Raptor
  • Manufacturer Part Number: 200292
  • UPC: 810174902013
  • Gauge: 20 Gauge
  • Choke Configuration: Invector
  • Material: 17-4 PH U.S. Stainless Steel
  • Range / Use: Mid-range, duck and dove hunting
  • Style: Extended, Cerakote finish with machined claw marks

What’s Included

  • RR2 Raptor Invector 20 gauge choke tube

Frequently Asked Questions

What range is the RR2 Raptor choke best suited for?

The RR2 is built for mid-range work, making it a strong match for ducks decoying in and dove passing at moderate distances. Its internal cuts are designed to keep the core pattern dense right where those birds typically end up. If you want tighter reach for geese and open water, the RR3 is the longer-range option in the same series.

Will this choke fit my 20 gauge shotgun?

This tube is cut for the standard 20 gauge Invector thread pattern, so it fits many common pumps and semi-autos running that system. Always confirm your barrel is marked Invector rather than Invector-Plus, since those are different threads. If you're unsure, check the stamping on your barrel or the flats before ordering.

Why is the RR2 Raptor made from 17-4 PH stainless steel?

17-4 PH U.S. stainless is a tough, corrosion-resistant grade that holds up to steel shot and repeated seasons in the field. It also lets Rob Roberts hold the tube to tighter tolerances than the industry standard, which helps produce those even, consistent patterns. It's a big reason these chokes hold their edge over the long haul.

Can I run the RR2 Raptor in both barrels of an over/under?

No, the Raptor design only allows placement in a single barrel of an over/under shotgun. You'll pick the one barrel where you want that mid-range performance and run a different choke in the other. On pumps and semi-autos with a single barrel, this isn't a concern.

Additional information

UPC

810174902013

Manufacturer

Manufacturer Part Number

200292

Caliber/Gauge

20 Gauge

Reviews

There are no reviews yet.

Be the first to review “Johnny Stewart RR2 Raptor Invector 20 Gauge 17-4 PH Stainless Choke”