Description
Bismuth has earned a real following among waterfowl and upland hunters, and it patterns differently than steel or lead. That is exactly the gap the Rob Roberts Biz Raptor Invector Choke Tube was built to fill. This one is dialed in specifically for bismuth shot, with internal geometry designed to tighten your core and keep pellets grouped where you want them at range. It fits 12 gauge shotguns using the Browning Invector choke system.
What Sets the Biz Raptor Apart
This choke is part of the Raptor Series, which came out of years of pattern testing and load-specific development. Instead of a one-size-fits-all approach, Rob Roberts built shot-specific constrictions, and the BIZ is the one tuned for bismuth. The result is a hotter, denser core pattern that holds together downrange, which matters when you are stretching shots on ducks or geese and every pellet counts.
Built From 17-4 PH Stainless Steel
The tube is machined from 17-4 PH U.S. stainless steel, a hard, corrosion-resistant alloy that stands up to heavy field use and wet-weather hunting. Rob Roberts machines these to tolerances tighter than the industry norm, and the Raptor line wears E-Series Cerakote with machined claw marks in place of traditional knurling, so you get a solid grip when you are threading it in with cold or gloved hands.
A Few Things Worth Knowing
Run 100 percent bismuth through this choke to get the performance it was designed for. Blended shot is not what it was built around, so stick with straight bismuth loads. It is also worth noting that on over/under and side-by-side shotguns, a Raptor choke goes in one barrel only, since the design does not allow placement in both. Match it to the right load and it will reward you with the kind of tight, even patterns that make longer shots realistic.
Key Specifications
- Manufacturer: Rob Roberts Gun Works
- Series: Raptor (RRaptor BIZ)
- Gauge: 12 Gauge
- Choke System: Browning Invector
- Optimized For: 100% Bismuth shot
- Material: 17-4 PH U.S. Stainless Steel
- Finish: E-Series Cerakote with machined claw marks
- Manufacturer Part Number: 200283
- UPC: 810174901924
What’s Included
- Rob Roberts Biz Raptor Invector Choke Tube (12 Gauge)
Frequently Asked Questions
What shot should I run through the Biz Raptor choke tube?
This choke is designed specifically for 100 percent bismuth shot, which is what unlocks its intended pattern performance. Avoid blended shot loads, since the BIZ profile is tuned around straight bismuth. Matching the choke to the load is the whole point of the shot-specific Raptor design.
Will this choke fit my 12 gauge shotgun?
It is cut for the Browning Invector choke system in 12 gauge. If your shotgun uses standard Invector threads, it will thread right in. Double-check that your barrel is Invector and not Invector-Plus, since those are different thread patterns.
Can I use the Biz Raptor in both barrels of my over/under?
No. On over/under and side-by-side shotguns, a Raptor choke can only go in one barrel because the design does not allow placement in both. You can pair it in a single barrel and run a different choke in the other.
What makes the Raptor Series different from a standard choke tube?
The Raptor line uses shot-specific constrictions developed through years of pattern testing, rather than a single all-purpose design. The BIZ version is built around bismuth to deliver a hotter, denser core pattern downrange. It is machined from 17-4 PH stainless to tolerances tighter than the industry standard.





Reviews
There are no reviews yet.