Description
When you run a threaded 9mm barrel, those exposed muzzle threads take a beating. Dust, grit, moisture, and the occasional bump against the case rail all add up, and cross-threaded muzzle threads are a headache nobody wants. This Rival Arms Thread Protector solves that with a clean, well-made cap that threads right onto any barrel cut for the standard 1/2"-28 pitch.
Rival Arms machines this piece from a solid billet of 416R stainless steel, the same grade used in match-quality barrels. That means it holds up against corrosion and wear round after round, and the low-temperature vacuum PVD finish adds a durable outer layer that resists scuffs and the elements. The stainless PVD look pairs nicely with a raw or silver barrel, and it's tough enough to live on your gun without babying.
What the Rival Arms Thread Protector Actually Does
Simple job, done right. When your suppressor or compensator comes off, this cap goes on to guard the crown and threads so everything stays true. Screw it on and your muzzle is protected against knocks and buildup. Take it off and your threads are clean and ready for whatever you want to mount next. It's the kind of small part that saves you real money by keeping an expensive threaded barrel in good shape.
Fitment for the 9mm 1/2-28 Thread Protector
This one covers the widest slice of 9mm barrels out there. Most aftermarket threaded pistol barrels for Glock and similar platforms use the 1/2"-28 pattern, so as long as your barrel is cut to that pitch, this will thread on without fuss. No gunsmithing, no tools, just hand-tight and you're set. It's a natural match for Rival Arms barrels, but it plays just as well with any other maker's 1/2"-28 muzzle.
Key Specifications
- Manufacturer: Rival Arms
- Model: Thread Protector
- Manufacturer Part Number: RARA300001D
- UPC: 788130029657
- Caliber: 9mm Luger
- Thread Pattern: 1/2"-28 TPI
- Material: 416R Stainless Steel
- Construction: CNC-Machined from billet
- Finish: Stainless PVD
- Country of Origin: Made in USA
What’s Included
- Rival Arms 9mm 1/2-28 thread protector (1)
Frequently Asked Questions
Will this Rival Arms thread protector fit my Glock barrel?
If your barrel is threaded in the standard 1/2"-28 pitch, this will thread right on. That covers most aftermarket threaded 9mm pistol barrels for Glock and similar platforms. It's not made by Glock, so double-check that your barrel uses the 1/2"-28 pattern rather than a metric thread before ordering.
Do I need any tools to install the 9mm thread protector?
No tools and no gunsmithing required. It simply spins on by hand until snug against the shoulder of your barrel. When you want to run a suppressor or compensator, unscrew it and set it aside.
What's the point of a thread protector if I already have a suppressor?
The protector goes on when your can or muzzle device is off. It keeps the threads and crown free of dirt, moisture, and dings so everything stays true and easy to mount later. Bare muzzle threads are easy to damage, and this small part keeps an expensive barrel in good shape.
Is the 416R stainless steel version rust resistant?
416R stainless is the same grade used in quality match barrels, so it stands up well to corrosion and wear. On top of that, this one wears a low-temperature vacuum PVD finish that adds an extra durable barrier against the elements. It's built to live on your gun without much fuss.



Reviews
There are no reviews yet.