$179.99
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Swapping a factory Glock barrel for the Rival Arms V1 Gold is one of the simplest upgrades you can make to a Glock 19 Gen5, and it pays off where it counts: on paper. This is a true drop-in barrel machined from 416R stainless steel billet, so it slides right into your Gen5 slide and locks up tight with no fitting, filing, or trip to the gunsmith. The gold PVD finish gives it a look that stands out through the ejection port, but the real story is the tighter tolerances that help pull your groups in compared to a stock barrel.
Inside the bore, Rival Arms runs its BORSLICK Boron Nitride DCD treatment. Beyond helping the barrel shed heat and resist carbon buildup, folks who've run these consistently mention the bore cleans up faster and with a lot less scrubbing than a factory tube. Add in the target-crowned muzzle, which protects the rifling right where the bullet exits, and you've got a barrel built for repeatable accuracy shot after shot. The 1:10 twist with 6-groove rifling is well matched to common 9mm loads, so it plays nice with everything from range plinking ammo to your carry rounds.
This one is cut specifically for the Gen5 frame, so make sure your pistol is a Gen5 before ordering since Gen3/4 barrels use a different part. The low-temperature vacuum PVD coating does double duty here, adding corrosion resistance and a hard, slick outer surface that stands up to the daily grind of racking and running the slide.
If you want a noticeable bump in accuracy without cracking open a gunsmithing kit, this is about as painless as upgrades get. Drop it in, function check it, and head to the range. Between the improved lockup, the easier cleaning, and that gold finish peeking out of the slide, the V1 Gold barrel earns its spot in the pistol.
Yes, this barrel is machined to drop straight into a Glock 19 Gen5 slide with no gunsmithing needed. Just field strip your pistol, swap the barrel, reassemble, and run a function check. Most folks report a tight lockup with no wobble right out of the box.
No, this specific barrel (RA20G203E) is cut for the Gen5 frame only. Rival Arms makes a separate Gen3/4 version, so double-check which generation your pistol is before ordering to make sure you get the right fit.
It does. The Boron Nitride DCD treatment helps resist carbon buildup and heat, and shooters consistently note the bore wipes clean faster and with less scrubbing than a factory barrel. It also contributes to more consistent performance as the barrel heats up during longer range sessions.
This particular barrel has a standard non-threaded target-crowned muzzle, so it is not set up for muzzle devices. If you want to add a suppressor or compensator, you'll want to look at Rival Arms' threaded barrel option instead.
| UPC | 788130029985 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | RA20G203E |
| Length | 4.02" |
| Model | |
| Shipping Weight | 0.32 |
You must be logged in to post a review.
Reviews
There are no reviews yet.