$199.99
10 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Rise Armament Blitz Performance Trigger in red takes the guesswork out of upgrading your AR. It's a self-contained cassette-style unit that drops into any mil-spec lower, so you can ditch the gritty factory trigger without fussing over loose springs and pins scattered across your bench. The headliner here is the feel: a clean single-stage break in the 3 to 3.5 lb range with virtually no creep and a reset that's genuinely fast.
That quick reset comes from Rise's Quik-Klik system, which gives you an audible click and a firm tactile bump the instant the trigger is ready to fire again. Pair that with their NoWay take-up, which cuts out the slack most triggers have before the sear engages, and you get a trigger that feels immediate from the moment you start your press. For anyone running rapid-fire drills, splits on steel, or a competition stage, that shorter cycle adds up.
The wide hybrid blade is the other big talking point. It borrows the comfort of a curved trigger and the control of a flat one, and it sits a bit further back in the trigger well, which leaves more room for larger hands or gloved fingers. The internals are hardened tool steel with a nitride finish for corrosion resistance, housed in a 6061 aluminum block that keeps the whole assembly strong and light at around 2.4 ounces.
This trigger works across the AR family, fitting mil-spec AR-15, AR-10, and AR-9 pattern rifles chambered in everything from .223/5.56 to .308, 6.5, and 9mm, which makes it a solid pick for PCC builds too. Installation is about as easy as it gets: line up the pin holes, push through the included anti-walk pins, and snug down the two fitting screws. Just don't crank those screws too tight, since that can throw off the pull weight. Every unit is inspected before it ships, so you're getting a trigger that's ready to run right out of the box.
The Blitz drops into any AR lower built to mil-spec dimensions, which covers AR-15, AR-10, and AR-9 pattern rifles. That includes calibers like .223/5.56, .308, 6.5, and 9mm, so it also works well in pistol caliber carbine builds. If your receiver takes standard trigger and hammer pins, this trigger will fit.
Not at all. Since it's a self-contained cassette unit, you just line up the pin holes, push the included anti-walk pins through, and tighten the two fitting screws. A word of caution: don't over-tighten those screws, since going too far can change the pull weight.
It's a single-stage trigger that breaks somewhere in the 3 to 3.5 lb range with very little creep. Rise's NoWay take-up removes the slack most triggers have before the sear engages, so the press feels immediate and the break is clean and crisp.
The Quik-Klik reset is short and gives you both an audible click and a tactile bump when the trigger is ready to fire again. That fast, positive reset helps you get back on target quicker for follow-up shots, which is a real advantage during rapid-fire drills and competition.
| UPC | 850043415435 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | RA-524-RED |
| Color | RED |
| Model | |
| Product Type | Trigger |
| Style | Single-Stage |
| Length | 7.0500 |
You must be logged in to post a review.
Reviews
There are no reviews yet.