Description
The Remington Ultimate Muzzleloader primed brass is the heart of what makes the Model 700 UML tick. Instead of fussing with 209 shotshell primers and open breech plugs, you drop one of these primed cases in, chamber it with the bolt, and you're ready to go. It loads with the same simplicity as any centerfire round, which is a big part of why this rifle earned its reputation as a true 300-yard muzzleloader.
What Makes the Ultimate Muzzleloader Brass Different
Each case is a uniquely sized brass shell fitted with a Remington 9-1/2 large magnum rifle primer. When the case seats against the breech plug, the rim creates an airtight seal that completely closes off the flash hole. That means the full flame from the primer drives straight into your powder charge with no leakage, giving you the consistent pressure and clean burn needed to light off heavy loads up to 200 grains. More powder burned efficiently translates to higher velocity, flatter trajectory, and more downrange energy.
Field-Ready and Built to Reload
These ship pre-primed in a bag of 24, ready to load straight out of the pouch. They come sealed in a heavy-duty laminated plastic pouch with a zip-style reclosable top and a moisture-eliminating desiccant packet, so your primers stay dry and dependable whether they're in your pack or on the shelf. A nice bonus for handloaders is that fired cases can be de-primed and re-primed again. Folks running the UML for a while report getting solid mileage out of a single case before the primer pocket wears, using a simple hand deprimer, a shell holder, and fresh large rifle magnum primers.
Why UML Owners Keep These On Hand
Hunters who run the Remington 700 Ultimate speak highly of how reliably these light off, especially paired with the factory recommended sabot loads. If you own a UML, this is the ignition source it was designed around, so keeping a bag or two in the gear bag means you're never caught short come deer season.
Key Specifications
- Manufacturer: Remington
- Manufacturer Part Number: 24153
- UPC: 047700465203
- Caliber: 50 Cal / Ultimate Muzzleloader
- Product Type: Primed Brass Ignition Case
- Primer: Remington 9-1/2 Large Magnum Rifle
- Quantity: 24 per bag
- Color: Primed Brass
- Length: 5.95 in
- Fits: Remington Model 700 Ultimate Muzzleloader
- Max Powder Charge: Up to 200 grains
- Reloadable: Yes, can be de-primed and re-primed
- Packaging: Resealable zip pouch with desiccant
What’s Included
- 24 Remington Ultimate Muzzleloader primed brass ignition cases
- Heavy-duty resealable laminated pouch with moisture-eliminating desiccant
Frequently Asked Questions
What rifle does the Remington Ultimate Muzzleloader primed brass work with?
These primed cases are made specifically for the Remington Model 700 Ultimate Muzzleloader and its UML ignition system. The case is push-fed onto the breech plug by the bolt to create the airtight seal the rifle depends on. They are not designed to work in other muzzleloaders or ignition setups.
Can I re-prime the Ultimate Muzzleloader brass cases after firing?
Yes. Since no combustion happens inside the case itself, you can de-prime a fired case and seat a fresh large rifle magnum primer using a hand deprimer and a hand priming tool with a .308-style shell holder. Many owners get roughly a couple dozen firings out of a case, but you should inspect the inside for any signs of gas leaking and retire any case that shows it.
What primer is used in these cases?
Each case comes seated with a Remington 9-1/2 large magnum rifle primer. It burns extra hot to fully ignite heavy powder charges and completely seals the flash hole for consistent pressure. That hot, sealed ignition is what lets the UML burn charges up to 200 grains efficiently.
How many cases come in a bag?
There are 24 pre-primed brass cases per bag, ready to load right out of the pouch. They arrive in a heavy-duty resealable laminated bag with a desiccant packet to keep the primers dry and dependable over time.





Reviews
There are no reviews yet.