Description
The Remington 783 is a lot of rifle for the money, but the factory two-piece scope base leaves room for improvement. This EGW 0 MOA one-piece Picatinny rail fixes that with a single machined base that drops right onto the short action receiver and gives your optic a continuous, uninterrupted mounting surface. The cross slots run the full length of the rail, so you've got plenty of room to slide your rings forward or back and dial in proper eye relief no matter what scope you're running.
Why the EGW 783 Rail Beats the Factory Base
This one is cut from domestic 6061 T6 extruded aluminum, then tumbled, sandblasted, and Type II anodized in a matte black finish for durability that holds up in the field. It measures 6.670 inches long with a center spread of 3.242 inches and sits about .4 inch from the top of the receiver to the top of the rail. At right around 2 ounces, it keeps weight down thanks to a relieved center channel, which matters when you're carrying the rifle all day on a hunt.
Mounting the Remington 783 Short Action Rail
Installation is straightforward. EGW includes #6-48 x 1/4 screws and a T-10 bit in the box, and they recommend torquing to 20 inch-pounds with a drop of blue Loctite to keep everything locked in. The rail is ambidextrous and plays nice with any standard Picatinny or Weaver rings, so you're free to run your own ring height and brand of choice. It's worth measuring the hole spacing on your receiver first just to confirm it lines up with the published dimensions before you start wrenching.
Picking 0 MOA for Your 783
The 0 MOA cant is the right call for most folks shooting inside 500 yards, which covers the vast majority of deer woods and range work. If you're reaching way out past that, EGW also makes a 20 MOA version, but for general hunting and plinking distances this flat base keeps your scope's adjustment centered where you want it. Made in the USA.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 40910
- UPC: 841370105335
- Model Fit: Remington 783 Short Action
- Rail Type: One-Piece Picatinny (MIL-STD 1913)
- Cant: 0 MOA
- Material: Domestic 6061 T6 Extruded Aluminum
- Finish: Matte Black Type II Anodized
- Overall Length: 6.670 in
- Center Spread: 3.242 in
- Height: .4 in (top of receiver to top of rail)
- Weight: Approx. 2 oz
- Ambidextrous: Yes
- Quick Disconnect Ring Compatible: No
- Recommended Torque: 20 in/lbs
- Origin: Made in USA
What’s Included
- EGW Remington 783 Short Action 0 MOA Picatinny rail
- #6-48 x 1/4 mounting screws
- T-10 bit
Frequently Asked Questions
Will this EGW rail fit my Remington 783?
It's machined specifically for the Remington 783 short action receiver. Before mounting, it's a good idea to measure the screw hole spacing on your receiver and compare it to the published center spread of 3.242 inches to confirm a match. Long action 783 receivers use a different EGW rail, so make sure yours is a short action.
What rings work with this Picatinny rail?
Any standard Picatinny or Weaver rings will clamp right onto this base, so you can pick your preferred height and brand. The cross slots run the full length of the rail, giving you plenty of room to position rings for proper eye relief. Keep in mind it is not compatible with quick-disconnect ring systems.
Should I choose the 0 MOA or 20 MOA version?
The 0 MOA is the one most people want. EGW recommends it for shooting from 0 to 500 yards, which covers typical hunting and range distances. The 20 MOA option is geared toward long range work out past 500 yards where you need extra elevation built into the base.
What do I need to install it?
Everything you need to attach the rail is in the box, including the #6-48 screws and a T-10 bit. EGW recommends torquing the screws to 20 inch-pounds and adding a drop of blue Loctite to keep them from backing out under recoil. A quality torque wrench helps you hit that spec without over-tightening.



Reviews
There are no reviews yet.