Description
The old Remington 513, 511, 512, and 521 rifles were built to last, but they came from an era before Picatinny anything. This EGW base fixes that. It's a one-piece rail machined from domestic 6061-T6 extruded aluminum and finished in a matte black Type II anodizing, so it shrugs off the knocks and weather that come with a rifle you actually take out. At roughly 2 ounces, it adds almost nothing to the gun while opening the door to modern rings, scopes, and other accessories.
Why the One-Piece Remington 513 Base Makes Sense
A single-piece rail keeps everything in line. There's no front-and-rear base to fight with during setup, which means less chance of ring misalignment and a more solid foundation for your optic. The cross slots run the length of the rail, giving you room to slide rings forward or back and dial in the eye relief that feels right for you. It carries a true 0 MOA incline, so it sits dead level, which is exactly what you want for the close-to-mid range work these rimfires were made for.
Fitment and Install on Your 511, 512, 513, or 521
This one covers a nice range of the Remington 500-series bolt guns: the 513, 511, 512, and 521. Worth knowing up front, this is a receiver-mounted rail, so your receiver needs to be drilled and tapped for it to go on. If yours already has the holes, the rest is straightforward. EGW includes #6-48 x 1/4 screws and a T-10 Torx bit right in the package. They recommend torquing to 20 inch-pounds with a drop of blue thread locker to keep things put under repeated shooting.
Built to Work With What You Already Own
Because it's a true Picatinny profile, it plays nice with both Picatinny and Weaver-style rings, so you're not locked into any one brand. Pair it with a set of quality rings and a rimfire scope and that old Remington turns into a surprisingly capable range or small-game rig. It's a simple, well-made upgrade that respects the rifle while bringing it into the current century.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 40320
- UPC: 841370114153
- Fits Models: Remington 513, 511, 512, 521
- Rail Type: One-Piece Picatinny
- MOA / Incline: 0 MOA
- Material: 6061-T6 Extruded Aluminum
- Finish: Matte Black Type II Anodizing
- Color: Black
- Center Spread: 2.245 in
- Height: 0.4 in (top of receiver to top of rail)
- Weight: 2 oz
- Mounting Hardware: #6-48 x 1/4 screws, T-10 Torx bit
- Torque Spec: 20 in-lbs
- Ambidextrous: Yes
What’s Included
- One-piece Picatinny base
- #6-48 x 1/4 mounting screws
- T-10 Torx bit
Frequently Asked Questions
Which rifles does this EGW Remington 513 Picatinny base fit?
It's made for the Remington 513, 511, 512, and 521 bolt-action rimfires. One rail covers all four of those models. Double-check your receiver against the fitment before ordering if you're unsure which version you have.
Does my receiver need to be drilled and tapped for this base?
Yes. This is a receiver-mounted rail, so it requires a drilled and tapped receiver to install. If your Remington already has the mounting holes, the rail bolts right on with the included screws.
What rings work with this Picatinny base?
It's a true Picatinny profile, so it accepts both Picatinny and Weaver-style rings. That gives you a wide choice of rings from just about any major brand to match the scope and height you're after.
What's included for mounting the Remington 513 base?
EGW includes the #6-48 x 1/4 mounting screws and a T-10 Torx bit in the package. They recommend torquing to 20 inch-pounds and adding a drop of blue thread locker, which is sold separately.





Reviews
There are no reviews yet.