Description
The .300 Blackout cartridge was built to do two things well: run supersonic loads through a standard AR-15 and switch over to subsonic rounds for suppressed work without missing a beat. Remington's UMC 220 grain load falls into that second camp, giving you a heavy, slow moving bullet that stays well under the sound barrier. This 50 round box is loaded with fresh brass cases and Kleanbore primers, made right at Remington's Lonoke, Arkansas plant, so you're getting consistent ammo without the boutique price tag that usually comes with subsonic rounds.
What the 220gr OTFB Bullet Brings to the Table
The open tip flat base bullet in this UMC load isn't a hunting hollow point, so don't expect expansion on impact. Instead, the narrow meplat and molten-core construction give it a smooth, form-fitted lead core that helps with rotational stability, while the flat base offers a uniform surface for propellant gases to push against as the bullet leaves the case. With a G1 ballistic coefficient around 0.68, it holds its trajectory well for a subsonic round, which makes it a solid pick for target work, steel plates, and varmint control at closer ranges.
Running UMC 220 Grain Through Your 300 Blackout Rifle
Because this load sits around 1,015 fps, it's firmly in subsonic territory, which is exactly what most 300 Blackout shooters are after when they're running a can. A lot of AR-15s chambered in this caliber are gassed with suppressed subsonic shooting in mind, so this ammo tends to cycle best with a suppressor attached. If you're shooting unsuppressed, some rifles with tighter gas ports may need a lighter buffer spring to cycle heavier subsonic loads reliably, which is common across the board with 220 grain ammo in this caliber and not unique to this load.
Each case is brass, boxer primed, and fully reloadable, so if you load your own ammo, this is a good way to build up a stash of once-fired brass while still getting solid factory performance out of the box. The non-corrosive primers and clean burning powder also mean less fouling in your action, which matters if you're putting a lot of rounds through a suppressed setup in one range trip. Between the price point and the round count in this box, it's an easy load to keep in bulk for practice days.
Key Specifications
- Manufacturer: Remington
- Model: UMC
- Manufacturer Part Number: 24026
- UPC: 047700490106
- Caliber: .300 AAC Blackout
- Bullet Weight: 220 Grain
- Bullet Type: Open Tip Flat Base (OTFB)
- Case Material: Brass, Boxer Primed
- Muzzle Velocity: 1,015 fps
- Muzzle Energy: 503 ft-lbs
- G1 Ballistic Coefficient: 0.68
- Rounds Per Box: 50
- Primer Type: Non-Corrosive, Kleanbore
- Country of Origin: USA (Lonoke, Arkansas)
What’s Included
- 50 rounds of Remington UMC .300 Blackout 220gr OTFB ammunition
- Reloadable brass casings
Frequently Asked Questions
Is this Remington UMC 220gr load subsonic?
Yes, this 220 grain OTFB round runs around 1,015 fps, which puts it well below the 1,125 fps threshold for subsonic ammo. That makes it a common choice for suppressed 300 Blackout builds where a quieter report matters.
Will this ammo cycle in my AR-15 without a suppressor?
It depends on your gas system. A lot of 300 Blackout uppers are gassed with the assumption that subsonic rounds will be run suppressed, so heavier loads like this 220 grain OTFB sometimes need a lighter buffer spring to cycle reliably unsuppressed. Running it with a can usually solves any short stroking issues.
Can I reload the brass from this UMC ammo?
Yes, the cases are brass and boxer primed, so they're reloadable once fired. Many handloaders pick up this load specifically to build a supply of quality 300 Blackout brass while still getting decent factory performance in the meantime.
Is the 220 grain OTFB bullet good for hunting?
This is an open tip design, not a hollow point, so it's not built to expand on impact. It's better suited to target shooting, training, and small varmints at closer range rather than anything requiring expansion for larger game.








Reviews
There are no reviews yet.