Description
This is the heaviest-duty rail EGW builds for the Remington 700 short action, and it's the one you reach for when you want a mounting platform that just won't budge. Where most bases are aluminum, this one is cut from solid 4140 carbon steel and wears a Mil-spec parkerized finish that shrugs off rust and hard field use. It's a one-piece Picatinny design with cross slots running the full length, so you've got room to slide your rings fore and aft until your scope sits exactly where your eye relief likes it. The built-in 20 MOA of forward cant is the real trick here, tilting the optic down to free up extra internal elevation for those longer pokes downrange.
Fitment for the Steel HD Remington 700 Short Action Rail
The bolt pattern matches short action Remington 700 receivers, think .223, .308 and similar chamberings, along with the 722 and 40X. It also covers a long list of 700-footprint rifles including various Bergara B14 and B14R models, Christensen Arms short actions, CVA Paramount and Endura, and more. The center spread between the two middle receiver holes measures 3.627 inches and the mount runs 6.276 inches overall, sitting right around 0.35 inches tall from the top of your receiver to the top of the rail.
Why the 20 MOA Steel HD Rail Earns Its Keep
Steel costs you a little weight over aluminum, but what you get in return is a rock-solid, flex-free foundation that holds zero shot after shot. The mount comes with a bevel machined on both sides, making it fully ambidextrous, and the cross slots are gauged to MIL-STD 1913 specs so your Picatinny or Weaver rings seat tight and repeatable. Folks running these on long-range builds consistently note how easy they go on and how well they hold up under recoil. Made right here in the USA.
EGW recommends torquing the screws to 20 inch-pounds with a drop of blue Loctite for a install that stays put. The 20 MOA cant is best suited to shooting in that 500 to 1000 yard window where you'll appreciate the extra elevation.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 86002
- UPC: 841370109555
- Model: Remington 700 / 722 / 40X Short Action
- Rail Type: One-Piece Picatinny (MIL-STD 1913)
- MOA: 20 MOA
- Material: Solid 4140 Carbon Steel
- Finish: Mil-spec Parkerized (Black)
- Center Spread: 3.627 in
- Overall Length: 6.276 in
- Height: Approx. 0.35 in (receiver top to rail top)
- Ambidextrous: Yes, beveled both sides
- Ring Compatibility: Picatinny or Weaver rings
- Recommended Torque: 20 in-lbs
- Country of Origin: Made in USA
What’s Included
- EGW Steel HD Picatinny rail (one-piece)
- Socket head Torx mounting screws
- Torx wrench / bit
Frequently Asked Questions
Will this EGW Steel HD rail fit my short action Remington 700?
Yes. The bolt pattern is cut for short action Remington 700 receivers such as .223 and .308 chamberings, plus the 722 and 40X. It also fits a range of 700-footprint rifles like certain Bergara B14/B14R, Christensen Arms short actions, and CVA Paramount and Endura models. Note that a Remington 700 rail will not fit a Howa 1500 or Weatherby Vanguard.
What does the 20 MOA on this rail actually do?
The 20 MOA is a built-in forward slope that tilts your scope slightly downward relative to the bore. That angle gives you back extra internal elevation inside the scope, which is what you want for reaching out to longer distances. EGW suggests the 20 MOA option for shooting roughly in the 500 to 1000 yard range.
How is the steel version different from EGW's aluminum rails?
This Steel HD model is machined from solid 4140 carbon steel and finished with a rust-resistant Mil-spec parkerized coating, making it the strongest, most rugged rail EGW offers for the 700. The aluminum versions are lighter, but the steel gives you maximum durability and a flex-free base for hard use. You trade a little extra weight for that toughness.
Does this rail come with everything I need to mount it?
It ships with the socket head Torx mounting screws and the wrench to install them, so you're set to get it on the receiver. EGW recommends torquing to 20 inch-pounds with a drop of blue Loctite to keep everything locked in. You'll still need your own set of Picatinny or Weaver rings for the scope itself.




Reviews
There are no reviews yet.