Description
Getting your glass solidly mounted is half the battle on any precision rifle, and this EGW rail takes the guesswork out of it. It's a one-piece Picatinny base machined from domestic 6061-T6 extruded aluminum and finished in matte black anodizing, so it shrugs off the weather and the wear that come with real range time. The 0 MOA angle is the right call for most shooting inside 500 yards, giving you a flat, true platform to zero from without eating up your scope's elevation travel.
Why the 0 MOA EGW Rail Works for Long Action Remingtons
This base is cut specifically for long action receivers, and it covers a wide spread of rifles. It fits the Remington 700, 721, and 725 long actions, and also drops onto the Bergara B14 long action (with #6 screws), Christensen Arms long action models, the Mauser M18, and the Sauer 100 and 101. The full-length Picatinny cross slots are the real selling point here since they let you slide your rings fore and aft to dial in eye relief, which is a lifesaver on rifles with longer or larger-objective scopes.
Specs and Fit on the Remington 700, 721, 725 Picatinny Rail
The rail runs 7.064 inches overall with a center spread of 4.485 inches and sits about a third of an inch above the receiver, keeping your scope low and your cheek weld natural. It's ambidextrous and accepts both Picatinny and Weaver-style rings, so you're not locked into one ring system. At right around two ounces, it adds almost nothing to the rifle's overall weight.
Mounting the EGW Long Action Base
Installation is straightforward. EGW recommends torquing the screws to 20 inch-pounds with a drop of blue Loctite for a mount that stays put shot after shot. The kit comes with the #6-48 x 1/4 screws and a T-10 bit, and the whole thing, right down to the hardware and packaging, is made in the USA.
Key Specifications
- Manufacturer: Evolution Gun Works (EGW)
- Manufacturer Part Number: 40100
- UPC: 841370105045
- MOA: 0 MOA
- Rail Type: One-Piece Picatinny
- Material: Domestic 6061-T6 Extruded Aluminum
- Finish: Matte Black Anodized
- Overall Length: 7.064 in
- Center Spread: 4.485 in
- Height: 0.35 in (top of receiver to top of Picatinny)
- Weight: Approx. 2 oz
- Ambidextrous: Yes
- Quick Disconnect Ring Compatible: No
- Mounting Hardware: #6-48 x 1/4 screws, T-10 bit
- Torque Spec: 20 in-lbs
- Country of Origin: United States
What’s Included
- EGW 0 MOA one-piece Picatinny rail
- #6-48 x 1/4 mounting screws
- T-10 bit
Frequently Asked Questions
Which rifles does this EGW long action rail fit?
It's made for long action receivers and covers a lot of ground. It fits the Remington 700, 721, and 725 long actions, plus the Bergara B14 long action (using #6 screws), Christensen Arms long action models, the Mauser M18, and the Sauer 100 and 101. Keep in mind a few models like the Remington 700 Police and Bergara Premier require the base to be drilled out for #8 screws.
Should I get the 0 MOA version or the 20 MOA?
The 0 MOA rail is the right pick for most shooting inside about 500 yards since it gives you a flat, neutral base to zero from. If you're regularly stretching things out to 1000 yards, a 20 MOA base buys you back some elevation travel in the scope. For general hunting and range use on a Remington long action, 0 MOA is the go-to.
What rings do I need with this Picatinny rail?
This is a true Picatinny-style base, so it accepts both Picatinny and Weaver-style rings. The full-length cross slots let you position your rings forward or back to get your eye relief dialed in. It is not quick-disconnect ring compatible, so plan on a standard ring setup.
How do I install the EGW rail so it stays put?
Installation is simple. EGW recommends torquing the screws to 20 inch-pounds with a drop of blue Loctite to keep everything locked down through recoil. The rail ships with the #6-48 x 1/4 screws and a T-10 bit, so you have the hardware you need right in the box.





Reviews
There are no reviews yet.