0
0

Redding Type S Bushing Neck Die Set 6mm ARC – 3 Die Set

UPC: 611760786747

$183.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Redding's Type S Bushing Neck Die Set is the setup to reach for when you're loading 6mm ARC and you care about neck tension as much as you care about anything else on the bench. This three-die set is machined on precision lathes to the kind of tolerances Redding built its name on, giving you clean, concentric brass that chambers smoothly and shoots tight.

The heart of the set is the Type S Bushing Neck Sizing Die. It uses interchangeable sizing bushings available in .001 inch increments, so you can tune neck tension to match your brass and your bullets instead of being stuck with whatever a one-size die hands you. Because the bushing floats and self-centers on the case neck, concentricity stays high and runout stays low. The adjustable decapping rod also lets you size only part of the neck if that's how you like to do it, which is a nice touch for folks chasing every last bit of consistency.

What Comes in the Redding Type S Neck Die Set

Along with the neck sizing die, the set includes a Body Die and a conventional bullet seating die. The Body Die handles full length sizing of the case body and bumps the shoulder for proper chambering without touching the neck, which is handy when brass starts getting sticky after several firings. The seating die features a bullet guide, a built-in crimp ring, and the correct seating plug for the caliber, and it can be adjusted to apply a crimp when you need one.

Dialing In the 6mm ARC Bushing Neck Set

Keep in mind the sizing bushings and the shellholder are sold separately, so you'll want to pick up the right bushing for your brass before your first session. Measure a loaded round's neck diameter, then choose a bushing a couple thousandths under that number to land the neck tension you want. With the correct bushing in hand, this set gives the 6mm ARC handloader a serious tool for building accurate, consistent ammunition on just about any single stage or turret press.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 78674
  • UPC: 611760786747
  • Caliber: 6mm ARC
  • Die Type: Type S Bushing Neck Die Set
  • Number of Dies: 3
  • Material: Case Hardened Steel
  • Bushing Increments: .001 inch
  • Bushings Included: No, sold separately
  • Shellholder Included: No, sold separately
  • Shipping Weight: 1.496 lbs

What’s Included

  • Type S Bushing Neck Sizing Die (with decapping rod and standard size button)
  • Body Die
  • Conventional Bullet Seating Die
  • Plastic storage box
  • Instructions

Frequently Asked Questions

Does the Redding Type S Neck Die Set come with bushings?

No, the sizing bushings are not included and are sold separately. This lets you pick the exact bushing diameter that matches your brass and the neck tension you're after. Bushings come in .001 inch increments, so measure a loaded round's neck and choose one a couple thousandths smaller.

What dies are in this 6mm ARC set?

You get three dies: the Type S Bushing Neck Sizing Die, a Body Die, and a conventional bullet seating die. The neck die controls neck tension with interchangeable bushings, the Body Die resizes the case body and bumps the shoulder, and the seating die sets your bullet and can apply a crimp if needed.

Is a shellholder included with this die set?

No, the shellholder is sold separately. The 6mm ARC uses the same case head size as several other cartridges, so if you already load similar rounds you may have the correct shellholder on hand. Otherwise you'll want to grab one before your first loading session.

Why choose a neck die set over a full length die set?

Neck sizing only works the neck of the case and leaves the body alone, which can extend brass life and help with consistency for ammo fired in the same rifle. The included Body Die is there for when brass starts getting hard to chamber, so you can bump the shoulder back as needed. This setup is popular with precision handloaders who want fine control over neck tension.

Additional information

UPC

611760786747

Manufacturer

Manufacturer Part Number

78674

Shipping Weight

1.496

Reviews

There are no reviews yet.

Be the first to review “Redding Type S Bushing Neck Die Set 6mm ARC – 3 Die Set”