Description
If you're loading .300 PRC and want full control over neck tension and seating depth, the Redding Type S Elite set covers the whole job in one box. It pairs two bushing sizing dies with Redding's Competition Seating Die, giving you the flexibility to neck size only for a chamber-fitted case or step up to a full-length resize whenever your brass needs it. This set came about from reloaders asking for both options in a single package instead of piecing together a body die and a separate neck operation.
What the Type S Elite Set Brings to .300 PRC Loading
The heart of this set is Redding's interchangeable bushing system. Swapping bushings lets you dial in neck diameter and tension in .001 inch increments, so you can set exactly how much grip you want on the bullet without overworking the brass. The bushings float freely in the die, which helps them self-center on the case neck for more uniform sizing. Bushings are sold separately, and for the .300 PRC the usable range runs from roughly .331 to .339, so you can match the setup to your specific brass and neck wall thickness.
Dialing In Seating Depth with the Competition Seating Die
The third die is where a lot of the accuracy magic happens. The Redding Competition Seating Die uses a micrometer top for fast, repeatable seating depth changes you can record and return to, plus a spring-loaded sliding sleeve that aligns the case and bullet before seating. That alignment is what keeps runout low and your loaded rounds concentric, which matters a lot with a long, heavy-for-caliber magnum like the .300 PRC.
A Few Things Worth Knowing
The dies are machined from case hardened steel and ship in a Redding storage box with a spare decapping pin. Keep in mind the set does not include neck bushings or a shellholder, so you'll want to grab the correct bushing for your brass and a #6 shellholder to go with it. Redding also notes this seating die is not intended for use with compressed loads.
Key Specifications
- Manufacturer: Redding
- Caliber: .300 PRC
- Manufacturer Part Number: 60776
- UPC: 611760607769
- Set Type: Type S Elite Bushing 3-Die Set
- Dies Included: Bushing Full Length Sizing, Bushing Neck Sizing, Competition Seating
- Neck Tension Adjustment: 0.001 inch increments via interchangeable bushings
- Bushing Range (.300 PRC): Approx. 0.331 to 0.339
- Material: Case hardened steel
- Thread: 7/8-14
- Shellholder: #6 (not included)
- Bullet Diameter: 0.308
- Shipping Weight: 1.945 lbs
What’s Included
- Type S Bushing Full Length Sizing Die (with decapping/expander unit)
- Type S Bushing Neck Sizing Die (with decapping/expander unit)
- Competition Micrometer Bullet Seating Die
- Spare decapping pin
- Redding storage box
Frequently Asked Questions
Does the Redding Type S Elite Die Set .300 PRC come with bushings?
No, neck sizing bushings are sold separately so you can match them to your exact brass and the neck tension you want. For the .300 PRC the usable bushing range runs from roughly .331 to .339. Measure a loaded round's neck diameter and subtract your desired tension to pick the right size.
What's the advantage of having both a full-length and neck sizing die in this set?
It gives you the flexibility to neck size only when your brass is fire-formed to your chamber, then full-length size whenever the case needs its shoulder bumped back for reliable chambering. This set was created specifically so reloaders could do both without buying a separate body die and running an extra operation. It's a nice all-in-one for keeping brass alive while staying consistent.
Is a shellholder included with the 60776 die set?
No, a shellholder is not included. The .300 PRC uses a #6 shellholder, so plan on adding one if you don't already have it in your setup.
How does the Competition Seating Die help accuracy?
It uses a micrometer adjustment for precise, repeatable seating depth settings you can write down and return to later. A spring-loaded sliding sleeve aligns the case and bullet before seating, which keeps runout low and your rounds concentric. That consistency is a big deal with long, heavy .300 PRC bullets. Note that this seating die is not intended for compressed loads.




Reviews
There are no reviews yet.