Description
Precision handloaders know that controlling neck tension is where accuracy really starts to come together, and that's exactly what this Redding .368 Titanium Nitride bushing is built for. It gives you a repeatable, measured grip on your bullet without working the brass any harder than it needs to be, which helps extend case life and keeps your groups tight.
What the Redding .368 TiN Bushing Brings to the Bench
This bushing starts as heat-treated steel, hand polished for smooth operation, then gets a titanium nitride surface treatment that pushes the effective surface hardness up around Rc 85. That harder, slicker finish noticeably reduces the friction as the case neck passes through, so sizing feels smoother on the press and the bushing holds up over the long haul. The .368 measures to the diameter stamped right on it, so there's no guessing which one you grabbed out of the box.
Fitting the Redding .368 Bushing to Your Dies
Every Redding neck sizing bushing shares the same external dimensions, 1/2 inch outside diameter by 3/8 inch long, so this .368 drops into any Redding bushing-style neck sizing die and interchanges freely with the rest of the lineup. Bushings run in .001 inch increments from .185 through .368, covering calibers from .17 all the way up to .338, and the .368 sits at the top end of that range for the larger cartridges.
Picking the Right Size
Getting the size right is simple. Measure the outside neck diameter of a loaded round with a good micrometer, then subtract .001 to .002 inch to account for brass spring-back and bullet tension. That gives you the amount of grip you want without over-working the neck. If you shoot more than one caliber or like to experiment with tension, it's worth keeping a few sizes on hand so you can fine-tune loads without swapping dies. Made in the USA by a company that's been setting the bar for precision reloading gear for decades.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 76368
- UPC: 611760763687
- Bushing Diameter: .368 inch
- Bushing Type: Titanium Nitride (TiN) coated, heat-treated steel
- Outside Dimensions: 1/2 inch O.D. x 3/8 inch long
- Surface Hardness: Approx. Rc 85 with TiN treatment
- Compatibility: All Redding bushing-style neck sizing dies
- Size Range Family: .185 to .368 inch in .001 inch increments
- Caliber Coverage: .17 to .338
- Country of Origin: Made in USA
What’s Included
- One Redding .368 Titanium Nitride neck sizing bushing (76368)
Frequently Asked Questions
Will the Redding .368 titanium nitride bushing fit my neck sizing die?
Yes, as long as you're running a Redding bushing-style neck sizing die. Every Redding bushing shares the same 1/2 inch O.D. by 3/8 inch length, so this .368 interchanges freely across all of them. You can swap sizes in the same die anytime you want to change neck tension.
How do I know if .368 is the right bushing size for my load?
Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract about .001 to .002 inch. That difference accounts for brass spring-back and gives you proper bullet tension. If your measured number lands around .369 to .370, the .368 is likely your bushing.
What's the difference between the titanium nitride and steel Redding bushings?
Both start as the same heat-treated, hand-polished steel. The titanium nitride version adds a surface coating that raises the effective hardness to around Rc 85 and reduces friction as the neck passes through. In practice, that means smoother sizing strokes and added durability over the plain steel version.
Does using the right bushing actually help with case life?
It can. By selecting a bushing that gives just the right neck tension, you avoid over-sizing and then over-expanding the brass on every cycle. Less working of the neck means the brass stays in service longer and produces more consistent results downrange.



Reviews
There are no reviews yet.