Description
Reloaders chasing tighter groups know that neck tension is one of the easiest ways to clean up your ammo, and Redding's bushing system makes it simple to fine-tune. This is the .364 diameter bushing with a titanium nitride surface treatment, and it gives you precise control over how firmly the case neck grips the bullet. Instead of overworking your brass with a one-size-fits-all die, you pick the exact bushing that matches your loaded cartridge and get just the right amount of tension.
What the Titanium Nitride Coating Brings
The base of this bushing is heat-treated steel, hand-polished to a surface hardness in the Rc 60-62 range. The titanium nitride treatment goes a step further, pushing the effective surface hardness up around Rc 85 while cutting down on sizing friction. In practical terms, that means smoother sizing strokes, less effort on the press, and a bushing that holds up over a lot of cases. The gold-colored coating also makes it easy to tell your TiN bushings apart from plain steel ones on the bench.
Fitting the .364 Redding Bushing to Your Setup
All Redding neck sizing bushings share the same external dimensions, so this .364 drops straight into any Redding bushing-style neck sizing die and swaps out in seconds. They also play nice with other bushing-style dies built around the L.E. Wilson pattern, so if you're running RCBS, Hornady, or Wilson gear, this bushing will likely fit right in.
Picking the Right Size
To land on the correct bushing, measure the neck diameter of a loaded round with a micrometer and subtract about .001 to .002 inches. You can also double your case neck wall thickness and add the bullet diameter. After loading a few, check that the bullet seats firmly and doesn't push deeper into the case under thumb pressure. If it moves too easily, step down to the next smaller bushing. The .364 size falls in the range that covers larger calibers, so match it to your specific brass and bullet combo for the cleanest results.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 76364
- UPC: 611760763649
- Bushing Diameter: .364 in
- Type: Neck Sizing Bushing
- Coating: Titanium Nitride
- Base Material: Heat-Treated Steel
- Steel Surface Hardness: Rc 60-62 (hand-polished)
- TiN Effective Surface Hardness: Approx. Rc 85
- External Dimensions: 1/2 in O.D. x 3/8 in long
- Fit: Redding bushing-style neck sizing dies; L.E. Wilson style
- Country of Origin: USA
What’s Included
- One Redding .364 Titanium Nitride neck sizing bushing
Frequently Asked Questions
What die does the Redding .364 titanium nitride bushing fit?
It fits all Redding bushing-style neck sizing dies since every Redding bushing shares the same 1/2 inch O.D. by 3/8 inch length. It also works with other bushing-style dies built on the L.E. Wilson pattern, including many from RCBS and Hornady. Swapping bushings takes just a few seconds.
How do I know if the .364 is the right bushing size for me?
Measure the neck diameter of a loaded cartridge with a micrometer and subtract about .001 to .002 inches to get your starting bushing size. Another method is to double your case neck wall thickness and add the bullet diameter. Load a few rounds and confirm the bullet holds firm without pushing deeper into the case, and step down a size if the grip feels loose.
What's the difference between the titanium nitride bushing and the plain steel version?
Both start as heat-treated steel hand-polished to roughly Rc 60-62 hardness. The titanium nitride version adds a surface coating that raises the effective hardness to around Rc 85 and reduces sizing friction. That translates to smoother sizing strokes and added durability, plus the gold color makes it easy to spot on the bench.
Does the titanium nitride coating make the neck smaller than the marked size?
No, the bushing is sized to its marked diameter, so a .364 bushing sizes to .364. The titanium nitride treatment is a thin surface coating meant to harden the sizing surface and cut friction, not change the dimension. You still select based on the printed size and your measured neck.




Reviews
There are no reviews yet.