Description
If you're chasing tighter groups and more consistent brass, neck tension is where a lot of the magic happens, and this is where the right bushing earns its keep. This is the Redding .329 Titanium Nitride neck sizing bushing, part number 76329, built to drop into any Redding bushing-style neck sizing die. It measures the standard 1/2 inch outside diameter by 3/8 inch long, so it interchanges freely across Redding's bushing dies and swaps out in seconds when you want to fine-tune your setup.
The real draw here is the titanium nitride coating. These start life as heat-treated steel bushings hand polished to a surface hardness of Rc 60-62, then get a TiN surface treatment that pushes the effective hardness even higher and drops the sizing friction way down. In plain terms, the bushing glides over the case neck with less effort, which means less drag on your brass and smoother strokes on the press. That slick surface also helps the bushing hold its size over a long reloading life.
Dialing In Neck Tension With the .329 Bushing
Picking the right bushing size is the whole point of running a bushing die. The common method is to measure the outside neck diameter of a loaded round with a good micrometer, then subtract about .001 to .002 inch to account for brass spring-back and proper bullet grip. Land on that number and this .329 bushing lets you set just enough neck tension to hold the bullet securely without over-working the brass. Less working means longer case life and more uniform seating from round to round.
Where the TiN 76329 Fits In
Redding offers these in .001 inch increments from .185 through .368, covering calibers from .17 up to .338, and every bushing is clearly stamped with its size for easy sorting on the bench. The .329 falls right in the range handloaders reach for with various 7mm and 30-caliber brass depending on neck thickness. If you already shoot a bushing-style setup, this is a straightforward upgrade over plain steel when you want that extra-slick feel. Made in the USA.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 76329
- UPC: 611760763298
- Bushing Diameter: .329 in
- Type: Neck Sizing Bushing
- Coating: Titanium Nitride (TiN)
- Base Material: Heat-Treated Steel
- Surface Hardness (Steel Base): Rc 60-62
- Outside Diameter: 1/2 in
- Length: 3/8 in
- Compatibility: Redding Bushing-Style Neck Sizing Dies
- Quantity: 1 Bushing
- Country of Origin: Made in USA
What’s Included
- One (1) Redding .329 Titanium Nitride neck sizing bushing
Frequently Asked Questions
What dies does the Redding .329 Titanium Nitride bushing fit?
It fits all Redding bushing-style neck sizing dies and interchanges freely between them. The standard 1/2 inch O.D. by 3/8 inch length means you can swap bushings in and out without any extra tools. It will not work in standard non-bushing dies.
How do I know if .329 is the right bushing size for my brass?
Measure the outside neck diameter of a loaded round using a precision micrometer, then subtract about .001 to .002 inch to allow for brass spring-back and bullet grip. If that number lands on .329, this bushing is your match. Neck wall thickness varies between brass brands, so it's smart to measure your own loaded rounds rather than go off a chart.
What's the advantage of the Titanium Nitride bushing over the plain steel version?
The TiN version starts as the same heat-treated steel bushing, then adds a titanium nitride surface treatment that raises the effective surface hardness and reduces sizing friction. The result is smoother, lower-effort sizing with less drag on your case necks. Many handloaders feel the difference on the press right away.
Does using the right bushing really help case life?
Yes. Selecting a bushing that sets just enough neck tension means you aren't over-sizing and over-working the brass every cycle. That reduced working translates to longer case life and more consistent bullet seating from round to round.




Reviews
There are no reviews yet.