Description
If you're running a Redding bushing-style neck sizing die and chasing that last bit of consistency, this .293 diameter Titanium Nitride bushing is the piece that lets you fine-tune neck tension to your exact load. Instead of oversizing the neck and working your brass harder than it needs to be, you pick a bushing that squeezes the neck down just enough to hold the bullet with the grip you want. That means less brass flow, longer case life, and tighter runout on your finished rounds.
What Sets the Redding TiN Bushing Apart
Redding builds these bushings from heat treated steel and then hand polishes them to a surface hardness of Rc 60-62 to cut down on sizing effort. The Titanium Nitride versions take it a step further with a TiN surface treatment that bumps up the effective hardness and slicks the sizing friction way down. In practice that means a smoother stroke on the press and a bushing that holds its dimension over a long reloading life. All of these are made in the USA.
Fitting the .293 Bushing to Your Dies
Every Redding neck sizer bushing shares the same external dimensions of 1/2 inch outside diameter by 3/8 inch long, so they freely interchange across all Redding bushing-style sizing dies. They come in .001 inch increments across the full .185 to .368 range, which covers everything from .17 up through .338 caliber. Each bushing is clearly marked with its size, so there's no guessing which one is in your die.
Picking the Right Size
To land on the correct bushing, measure the outside neck diameter of a loaded cartridge with a good micrometer, then subtract about .001 to .002 inch to account for brass spring-back and the tension you want on the bullet. The .293 is a common fit for several popular cartridges, but measuring your own loaded rounds is always the way to confirm. Keep in mind the shellholder and dies are sold separately.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 76293
- UPC: 611760762932
- Bushing Diameter: .293 in
- Coating: Titanium Nitride (TiN)
- Base Material: Heat treated steel
- Surface Hardness: Rc 60-62
- Outside Diameter: 1/2 in
- Length: 3/8 in
- Size Range Available: .185 in to .368 in in .001 in increments
- Caliber Coverage: .17 through .338
- Quantity: 1 bushing
- Country of Origin: USA
What’s Included
- One Redding .293 Titanium Nitride neck sizing bushing (PN 76293)
Frequently Asked Questions
Which dies will the Redding .293 Titanium Nitride bushing fit?
It fits all Redding bushing-style neck sizing dies. Every Redding bushing shares the same 1/2 inch outside diameter by 3/8 inch length, so they interchange freely across the lineup. Just drop it into your bushing die, snug it up, and you're set.
How do I know if .293 is the right bushing for my cartridge?
Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract about .001 to .002 inch to allow for brass spring-back and the bullet tension you want. Whatever number you land on is your bushing size. Measuring your own loaded rounds is always more reliable than going off a chart alone.
What's the advantage of the Titanium Nitride bushing over the plain steel version?
Both are built from heat treated steel and hand polished to Rc 60-62, so they size the same. The Titanium Nitride version adds a TiN surface treatment that raises the effective hardness and reduces sizing friction, which makes for a smoother stroke and a bushing that wears well over time.
Does this bushing come with a die or shellholder?
No, this listing is for the single .293 bushing only. The shellholder and the neck sizing die are sold separately. You'll need a Redding bushing-style die to use it.




Reviews
There are no reviews yet.