0
0

Redding .281 Titanium Nitride Neck Sizing Bushing (76281)

UPC: 611760762819

$34.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Neck tension is one of those details that separates good handloads from great ones, and the Redding .281 Titanium Nitride bushing gives you precise control over it. Instead of over-working your brass every cycle, you pick the exact bushing diameter that resizes the neck just enough to hold the bullet where you want it. This one measures .281 inches at the inside diameter and carries Redding part number 76281.

What the .281 TiN Bushing Brings to the Bench

Redding builds these from heat-treated steel, then hand polishes each one to a surface hardness of Rc 60-62. The titanium nitride coating is the extra step that sets this version apart from the plain steel bushings. That gold-colored TiN surface bumps up the hardness even further and cuts down sizing friction, so the brass slides through smoother and you feel less effort on the press handle. Less friction also means less drag on the neck, which plays nicely with consistent runout and bullet seating.

Fitment and Sizing the Redding 76281 Correctly

Every Redding bushing shares the same external footprint, 1/2 inch O.D. by 3/8 inch long, so this .281 drops into any Redding bushing-style neck sizing die and interchanges freely with the rest of the lineup. They also work in most other popular brands of bushing dies. To land on the right size for your load, measure the outside neck diameter of a loaded or dummy cartridge with a good micrometer, then subtract about .001 to .002 inches to account for brass spring-back and proper bullet tension. If your neck wall thickness varies more than a couple thousandths, you may want to go a hair smaller and finish with a sizing button.

Redding bushings are made in the USA and cover calibers from .17 all the way up through .338, available in .001 inch increments. Grab a couple sizes on either side of your target number and you can fine-tune neck tension load by load.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 76281
  • UPC: 611760762819
  • Bushing Diameter (I.D.): .281 in
  • Coating: Titanium Nitride (TiN)
  • Base Material: Heat-treated steel
  • Surface Hardness: Rc 60-62
  • Outside Diameter: 1/2 in
  • Length: 3/8 in
  • Fitment: Redding bushing-style neck sizing dies
  • Caliber Range Covered: .17 through .338
  • Country of Origin: USA

What’s Included

  • One Redding .281 Titanium Nitride Neck Sizing Bushing (76281)

Frequently Asked Questions

Which dies does the Redding .281 titanium nitride bushing fit?

It drops into any Redding bushing-style neck sizing die and interchanges freely with the rest of the Redding bushing lineup since they all share the same 1/2 inch O.D. by 3/8 inch length. It also works in most other popular brands of bushing dies. No special setup needed, just swap it in.

How do I pick the right bushing diameter?

Measure the outside neck diameter of a loaded or dummy cartridge with a precision micrometer, then subtract about .001 to .002 inches to allow for brass spring-back and bullet tension. That number gets you to the correct bushing size. If your neck wall thickness varies more than a couple thousandths, consider going slightly smaller and finishing with a sizing button.

What's the difference between the titanium nitride and plain steel Redding bushings?

Both start as the same hand-polished, heat-treated steel hardened to Rc 60-62. The titanium nitride version adds a TiN surface treatment that raises the effective surface hardness and reduces sizing friction, so brass passes through smoother. Many handloaders like the TiN coating for lighter press effort and reduced neck drag.

Will this bushing work for my cartridge?

That depends on your loaded neck diameter rather than the cartridge name, since the same .281 bushing can serve different calibers. Redding offers bushings in .001 inch increments covering everything from .17 up through .338. Measure your loaded round and subtract .001 to .002 inches to confirm .281 is the size you need.

Additional information

UPC

611760762819

Manufacturer

Manufacturer Part Number

76281

Reviews

There are no reviews yet.

Be the first to review “Redding .281 Titanium Nitride Neck Sizing Bushing (76281)”