0
0

Redding .274 Titanium Nitride Neck Sizing Bushing (76274)

UPC: 611760762741

$34.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Serious handloaders know that neck tension is where a lot of accuracy lives, and this Redding .274 bushing gives you the control to nail it. It's part of Redding's titanium nitride line, built on the same heat-treated steel as their standard bushings but finished with a TiN surface treatment that bumps up the hardness and slicks the inside of the bushing so cases slide through with noticeably less effort. The result is cleaner sizing, less drag, and a bushing that holds its dimensions trip after trip to the bench.

What the .274 Bushing Does for Your Neck Tension

The whole idea behind a bushing-style setup is letting you size the neck down just the right amount instead of overworking the brass. By picking the bushing that matches your loaded round, you set exactly how much the neck grips the bullet. To find your size, measure the outside neck diameter of a loaded cartridge with a good micrometer and subtract about .001 to .002 inch to account for brass spring-back. That lands you on the diameter that holds the bullet without squeezing the neck harder than it needs to be.

Why the Titanium Nitride Finish Earns Its Keep

Redding bushings are hand polished to a surface hardness of around Rc 60-62, and the titanium nitride coating takes that a step further. The TiN treatment reduces friction as the case neck passes through, which means smoother strokes on the press and a finish that resists wear over a long reloading life. If you're running a lot of brass or working with tougher necks, that reduction in sizing effort adds up fast.

Fits Right Into Your Redding Bushing Dies

This bushing carries the standard 1/2 inch outside diameter by 3/8 inch long dimensions, so it freely interchanges across all Redding bushing-style neck sizing dies. Each one is clearly marked with its size, and it's made in the USA. Pair it with a few different diameters and you've got the flexibility to tune neck tension across different loads and brass lots without buying a whole new die.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number (MPN): 76274
  • UPC: 611760762741
  • Bushing Diameter: .274 inch
  • Type: Neck Sizing Bushing
  • Material: Heat-treated steel with Titanium Nitride surface treatment
  • Surface Hardness: Approx. Rc 60-62
  • Dimensions: 1/2 inch O.D. x 3/8 inch long
  • Compatibility: All Redding bushing-style neck sizing dies
  • Caliber Range Covered by Line: .17 through .338
  • Country of Origin: USA

What’s Included

  • One Redding .274 Titanium Nitride neck sizing bushing (76274)

Frequently Asked Questions

How do I know if the .274 is the right bushing size for my loads?

Measure the outside neck diameter of a loaded or dummy cartridge with a precision micrometer, then subtract about .001 to .002 inch to allow for brass spring-back and bullet tension. That number is your bushing size. If your necks happen to measure out around .275 to .276 loaded, the .274 bushing is likely in your range, but always measure your own brass first.

What's the difference between the titanium nitride bushing and the steel version?

Both start as the same hand-polished, heat-treated steel with a surface hardness around Rc 60-62. The titanium nitride bushing adds a TiN surface treatment that increases the hardness even further and reduces sizing friction, so cases slide through with less effort. If you size a lot of brass, the smoother stroke and added wear resistance are worth it.

Will this bushing fit my Redding die?

Yes. The .274 bushing uses the standard 1/2 inch outside diameter by 3/8 inch long dimensions, so it freely interchanges in all Redding bushing-style neck sizing dies. Both the steel and titanium nitride bushings share those same external dimensions, so you can swap between sizes as your loads require.

Can I use more than one bushing to fine-tune neck tension?

Absolutely, and a lot of precision reloaders do exactly that. Keeping a couple of bushings a thousandth or two apart lets you experiment with neck tension across different brass lots and bullet combinations to find what shoots best. Since they drop right into the same die, switching is quick.

Additional information

UPC

611760762741

Manufacturer

Manufacturer Part Number

76274

Reviews

There are no reviews yet.

Be the first to review “Redding .274 Titanium Nitride Neck Sizing Bushing (76274)”