0
0

Redding .273 Titanium Nitride Neck Sizing Bushing (76273)

UPC: 611760762734

$34.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is the .273 diameter bushing from Redding's Titanium Nitride lineup, built for folks running bushing-style neck sizing dies who want to control exactly how much their brass gets worked. It starts as heat treated steel, hand polished to a surface hardness of Rc 60-62, then gets a titanium nitride coating layered on top to push that surface hardness even higher and knock down friction as the case neck passes through. The result is smoother sizing strokes and a bushing that holds its dimensions through a long run of brass.

What the .273 Redding Bushing Does for Your Loads

The whole idea behind a bushing die setup is giving you control over neck tension instead of leaving it up to a fixed sizing diameter. By picking the right bushing, you size the neck down just enough to grip the bullet properly without overworking the brass, which means less runout, more consistent seating, and longer case life. To land on the right size, measure the outside neck diameter of a loaded round with a good micrometer and subtract about .001 to .002 inches to account for brass springback and the tension you want on the bullet. That math is what points you to a .273 in this case.

How the Redding TiN .273 Bushing Fits In

This bushing carries the standard external dimensions of 1/2 inch O.D. by 3/8 inch long, so it freely interchanges in all Redding bushing-style neck sizing dies and drops into Wilson-style setups too. Redding offers these in .001 inch increments across the .185 to .368 range, covering everything from .17 up through .338 caliber, and each one is clearly marked with its size ID so you are never guessing which bushing is in your hand.

The titanium nitride version is the step up from the plain heat treated steel bushings. You get the same precision machining and polish, plus that gold-toned TiN layer doing the heavy lifting on friction reduction. For precision reloaders chasing tight, repeatable neck tension, it is one of those small parts that quietly makes a real difference on the bench.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 76273
  • UPC: 611760762734
  • Bushing Diameter: .273 inch
  • Type: Titanium Nitride (TiN) Coated Neck Sizing Bushing
  • Base Material: Heat treated steel
  • Surface Hardness: Rc 60-62 base steel, increased by TiN coating
  • External Dimensions: 1/2 inch O.D. x 3/8 inch long
  • Fitment: All Redding bushing-style neck sizing dies; interchanges with Wilson-style
  • Available Range: .185 to .368 inch in .001 inch increments
  • Caliber Coverage: .17 through .338
  • Quantity: 1 bushing

What’s Included

  • One Redding .273 Titanium Nitride neck sizing bushing (76273)

Frequently Asked Questions

What dies does the Redding .273 titanium nitride bushing fit?

It carries the standard 1/2 inch O.D. by 3/8 inch long external dimensions, so it freely interchanges in all Redding bushing-style neck sizing dies. It also works with Wilson-style bushing setups. The bushing is sold on its own, so you will need a compatible bushing die to use it.

How do I know if .273 is the right bushing size for my brass?

Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract about .001 to .002 inches. That accounts for brass springback and gives you the neck tension needed to hold the bullet securely. Whatever number you land on is the bushing diameter you want, and in this case that works out to .273.

What is the difference between the titanium nitride and plain steel Redding bushings?

Both start as the same heat treated steel bushing hand polished to a surface hardness of Rc 60-62. The titanium nitride version adds a TiN coating on top that further increases the effective surface hardness and reduces sizing friction. That means smoother strokes and a bushing that holds up well over a lot of brass.

Does this bushing come marked with its size?

Yes, each Redding bushing is clearly marked with its size ID. That makes it easy to keep track of which diameter you have in hand when you are swapping bushings on the bench, especially if you run several sizes for different loads.

Additional information

UPC

611760762734

Manufacturer

Manufacturer Part Number

76273

Reviews

There are no reviews yet.

Be the first to review “Redding .273 Titanium Nitride Neck Sizing Bushing (76273)”