0
0

Redding Titanium Nitride Neck Sizing Bushing .245 – 76245

UPC: 611760762451

$34.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're running a Redding bushing-style neck sizing die and want more control over your case neck tension, this .245 Titanium Nitride bushing is one of the simplest upgrades you can make to your reloading bench. It starts as heat treated steel and then gets a titanium nitride surface treatment, which ups the effective surface hardness and knocks down sizing friction. The payoff is a smoother sizing stroke and the ability to tune exactly how much grip your case neck has on the bullet, no more sizing the neck way down and then opening it back up with an expander.

What the Titanium Nitride Bushing Does Differently

The whole point of a bushing system is precision. Instead of one-size-fits-all neck sizing, you pick the bushing diameter that matches your brass and your preferred tension. This .245 bushing has a .245 internal diameter and the standard Redding external dimensions of 1/2 inch outside diameter by 3/8 inch long, so it drops right in alongside the rest of your set. The titanium nitride coating gives it that distinctive bronze look and, with the neck lightly lubed, it tends to leave case necks clean without scuffing or drag marks.

Picking the Right Redding Bushing Size

Redding offers these bushings in .001 inch increments across a wide range, covering everything from small calibers up through the larger stuff, and each one is clearly marked with its size on the bushing itself. The usual approach is to measure the neck diameter of a loaded round and subtract a couple thousandths for your desired tension. Since they interchange freely in all Redding bushing-style sizing dies and also work with L.E. Wilson style bushings, it's easy to build out a collection as you fine-tune different loads.

This one is made in the USA and is a favorite among precision and benchrest handloaders who care about repeatable concentricity and consistent neck tension. If you're chasing tighter groups and want your necks sized with less effort and less working of the brass, a titanium nitride bushing earns its spot in the kit.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 76245
  • UPC: 611760762451
  • Type: Neck Sizing Bushing
  • Internal Diameter: .245 in
  • Outside Diameter: 1/2 in
  • Length: 3/8 in
  • Surface Treatment: Titanium Nitride over heat treated steel
  • Surface Hardness: Rc 60-62
  • Compatibility: All Redding bushing-style neck sizing dies; interchanges with L.E. Wilson style bushings
  • Color: Bronze
  • Country of Origin: USA

What’s Included

  • One Redding .245 Titanium Nitride neck sizing bushing

Frequently Asked Questions

What dies does the Redding Titanium Nitride .245 bushing fit?

It interchanges freely in all Redding bushing-style neck sizing dies. It also fits L.E. Wilson style bushing setups thanks to the shared external dimensions. You just drop it into the top of your bushing die and lock it in place.

How do I know if .245 is the right bushing diameter for my load?

The common method is to measure the neck diameter of a loaded cartridge and subtract one to three thousandths for your desired neck tension. That difference gives you your bushing size. Many precision handloaders keep a couple of sizes on hand to fine-tune tension for different brass and bullet combinations.

What's the advantage of the Titanium Nitride bushing over a plain steel one?

The Titanium Nitride bushing starts as heat treated steel and adds a titanium nitride surface treatment that increases the effective surface hardness and reduces sizing friction. That means a smoother sizing stroke and less drag on your case necks. With the neck lightly lubed, it tends to leave necks clean without marking them up.

Is this bushing made in the USA?

Yes, Redding bushings are made in the USA. They're hand polished to a surface hardness of Rc 60-62 and clearly marked with their size for easy identification on the bench.

Additional information

UPC

611760762451

Manufacturer

Manufacturer Part Number

76245

Reviews

There are no reviews yet.

Be the first to review “Redding Titanium Nitride Neck Sizing Bushing .245 – 76245”