Description
Redding's Series B Neck Die Set for the 6.5 PRC is a two-die package aimed at the reloader who keeps a dedicated batch of brass for a single bolt-action rifle. Instead of squeezing the whole case back down like a full-length die, the neck sizing die only works the case neck, which is exactly what a lot of precision folks are after. The set ships with a neck (NK) resizing die that carries a decapping rod assembly and a neck expander button, plus a seating (ST) die that includes a bullet guide, a built-in crimp ring, and the correct seating plug for the 6.5 PRC.
Why Reloaders Reach for the Redding 6.5 PRC Neck Die Set
When you fire a case, it expands to fit your chamber. Neck sizing leaves that custom fit intact and only resizes enough of the neck to grip the next bullet. The payoff is longer brass life since the body and shoulder aren't getting worked over every cycle, along with the kind of neck tension and bullet alignment that bolt-gun shooters chase for better consistency downrange. It also takes less effort on the press and, with the right setup, less fuss overall.
What Sets the Redding Series B Dies Apart
Redding machines these dies on precision lathes and heat treats them in atmospherically controlled furnaces, so they're built to hold tight tolerances and go the distance. The bodies use the industry-standard 7/8-14 thread, meaning they'll thread right into most any single-stage or turret press you've already got on the bench. The seating die's bullet guide helps start the bullet straight, and the built-in crimp ring is there if you want it, though a lot of bolt-gun loaders skip the crimp entirely for precision work.
Good to Know Before You Load
Neck-sized-only brass is matched to the chamber it was fired in, so these rounds are best kept to the rifle they came from rather than swapped between guns. After several firings, cases may need a full-length pass to chamber smoothly again, which is normal with any neck sizing setup. Worth noting too: the 6.5 PRC uses a #6 shell holder, and that's sold separately.
Key Specifications
- Manufacturer: Redding
- Caliber: 6.5 PRC
- Die Set Type: Neck Die Set (Series B)
- Number of Dies: 2
- Case Design: Bottleneck
- Die Operations: Neck sizing, decapping, bullet seating
- Die Body Thread: 7/8-14
- Bullet Diameter: 0.264
- Shell Holder: #6 (sold separately)
- Material: Alloy steel
- Manufacturer Part Number: 82487
- UPC: 611760824876
- Shipping Weight: 1.8 lbs
What’s Included
- Neck (NK) resizing die with decapping rod assembly and neck expander button
- Seating (ST) die with bullet guide, built-in crimp ring, and seating plug
Frequently Asked Questions
What's the difference between this Redding 6.5 PRC Neck Die Set and a full-length die set?
A full-length die resizes the entire case back toward factory spec, while this neck die only resizes the case neck. Neck sizing leaves the body and shoulder fire-formed to your chamber, which tends to extend brass life and help consistency in a bolt gun. If you load for a semi-auto or swap ammo between rifles, a full-length set is the better call.
Does the 6.5 PRC Neck Die Set come with a shell holder?
No, the shell holder is not included. The 6.5 PRC uses a #6 shell holder, and you'll need to pick one up separately if you don't already have it on your bench.
Will these dies work in my reloading press?
Yes, Redding dies use the standard 7/8-14 threaded body, so they'll thread into virtually any single-stage or turret press. That standard sizing is one less thing to worry about when you set them up.
Can I use neck-sized brass in a different rifle?
It's not recommended. Neck-sized-only cases stay fit to the chamber they were fired in, so they may not chamber reliably in another rifle of the same caliber. Keep neck-sized brass dedicated to the rifle it came from, or switch to full-length sizing if you need rounds that feed across multiple guns.




Reviews
There are no reviews yet.