0
0

Redding Series A Taper Crimp Die .38 Spl / .357 Mag (85282)

UPC: 611760852824

$37.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Redding built the Series A Taper Crimp Die for folks who want the uniformity of a taper crimp on their straight-wall handgun loads. It's a single die that handles both .38 Special and .357 Magnum, so one tool covers two of the most popular wheelgun rounds out there. Instead of rolling the case mouth over like a traditional roll crimp, a taper crimp tightens gradually and evenly, holding the bullet firmly in place without altering your cartridge's overall length.

The big draw with a taper crimp is how gentle it is on your brass. It doesn't work the case mouth nearly as hard as a roll crimp, which makes it a favorite for plated bullets where a heavy roll crimp can bite through the thin copper plating. It's also the go-to when you're running bullets without a cannelure and still want consistent, repeatable neck tension round after round.

What the Redding Taper Crimp Die Does Differently

Because this is a combination die, it's set up to crimp both the shorter .38 Special and the longer .357 Magnum case. When you switch between the two, you back the die out or run it in to relocate the crimp for the different case lengths. Machined from steel to Redding's usual tolerances, it threads into any standard 7/8-14 press and fits right into your existing single-stage or progressive setup.

Getting the Most Out of Your .38 / .357 Loads

Reloaders reach for a dedicated crimp die like this when they want to separate seating and crimping into two clean steps, which gives you tighter control over consistency. It pairs naturally with a Redding die set but works just as well alongside dies from other makers. Redding backs its reloading equipment with a lifetime warranty against defects in materials and workmanship, which tells you plenty about how these are built. The die ships in a plastic storage case to keep it protected on the bench or in the drawer.

Key Specifications

  • Manufacturer: Redding
  • Model: Series A Taper Crimp Die
  • Caliber: .38 Special / .357 Magnum
  • Die Type: Taper Crimp (combination die)
  • Case Type: Straight-wall handgun
  • Thread: 7/8-14 standard
  • Material: Steel
  • Manufacturer Part Number: 85282
  • UPC: 611760852824
  • Country of Manufacture: United States
  • Shipping Weight: 0.425 lbs

What’s Included

  • Redding Series A Taper Crimp Die (.38 Spl / .357 Mag)
  • Plastic storage case

Frequently Asked Questions

Does the Redding taper crimp die work for both .38 Special and .357 Magnum?

Yes. The 85282 is a combination die designed to crimp both calibers with one tool. Since the two cases are different lengths, you simply adjust the die in or out to relocate the crimp when you switch from .38 Special to .357 Magnum or back.

What's the difference between a taper crimp and a roll crimp for .38 / .357?

A roll crimp folds the case mouth into the bullet's cannelure, while a taper crimp tightens gradually and evenly without rolling the mouth over. The taper crimp is gentler on your brass and doesn't change the cartridge's overall length. It's a popular choice for plated bullets and bullets without a cannelure where a heavy roll crimp could cause problems.

Will this die fit my press?

It uses the standard 7/8-14 thread, so it threads into virtually any common single-stage or progressive reloading press. It drops right into an existing .38 Special or .357 Magnum die setup as a dedicated crimp station.

Is this a complete die set or just the crimp die?

This is the standalone taper crimp die, not a full sizing and seating set. It's meant to handle the crimping step on its own, which lets you separate seating and crimping into two operations for better consistency. Pair it with your sizing, expanding, and seating dies to complete the process.

Additional information

UPC

611760852824

Manufacturer

Manufacturer Part Number

85282

Shipping Weight

0.425

Reviews

There are no reviews yet.

Be the first to review “Redding Series A Taper Crimp Die .38 Spl / .357 Mag (85282)”