Description
Loading for the big .300 Remington Ultra Magnum means working with a large, high-capacity case, and this Redding Deluxe set gives you the tools to do it right. Where a standard two-die set only gets you full length sizing and seating, this three-die package adds a dedicated neck sizing die so you can tailor your brass to the way you shoot. That extra die is the whole reason to step up to the Deluxe.
What Makes the Redding Deluxe 300 RUM Set Different
The full length sizing die resizes the entire case body and bumps the shoulder back, which keeps rounds chambering smoothly in any SAAMI-spec rifle. It comes with a decapping rod assembly, sizing button, and decapping pin so you knock out spent primers while you size. The neck sizing die works the neck only, leaving the fire-formed body alone for a snug fit to your particular chamber. That approach can stretch case life and help you wring out a little more accuracy, which matters when you're feeding a cartridge that burns this much powder. The conventional bullet seater rounds out the set with a built-in crimp ring and an adjustable seating plug.
Getting the Most From Your 300 Remington Ultra Magnum Dies
Neck sizing is a bolt-action trick. If you run the same brass through the same rifle, size the necks only and reserve the full length die for when the bolt starts to close hard. Keep in mind that neck-sized-only cases are fitted to one chamber, so they may not drop into a different .300 RUM rifle without a full length pass first. Remember to lube your cases before sizing, since this is a large bottleneck case with plenty of surface area.
The dies thread into any standard 7/8-14 press, which covers just about every single-stage and turret press out there. A shell holder is not included, so grab the correct one for the .300 RUM case head if you don't already have it in your kit.
Key Specifications
- Cartridge: .300 Remington Ultra Magnum
- Set Type: Deluxe 3-Die Set
- Number of Dies: 3
- Dies Included: Full Length Sizing, Neck Sizing, Bullet Seating
- Case Type: Bottleneck Rifle
- Thread Size: 7/8-14
- Manufacturer: Redding
- Manufacturer Part Number: 84288
- UPC: 611760842887
- Shipping Weight: 2.0 lbs
What’s Included
- One Redding Full Length Sizing Die with decapping rod, sizing button, and decapping pin
- One Redding Neck Sizing Die with decapping rod, sizing button, and decapping pin
- One Redding conventional Bullet Seating Die with seating plug
- Die storage box
Frequently Asked Questions
What dies come in the Redding 300 RUM Deluxe set?
You get three dies: a full length sizing die, a neck sizing die, and a conventional bullet seating die. The full length and neck sizing dies both include a decapping rod assembly with a sizing button and decapping pin. It's the full standard Deluxe configuration, not the Premium version with carbide buttons or a micrometer seater.
Does this set include a shell holder?
No, the shell holder is not included with this set. You'll need the correct shell holder for the .300 Remington Ultra Magnum case head, which you can add separately if it's not already in your kit.
When should I use the neck sizing die instead of the full length die?
Neck sizing is best when you're reloading brass that will be fired in the same rifle it was shaped to. It sizes the neck only and leaves the fire-formed body alone, which can improve case life and accuracy. Just go back to full length sizing when the bolt gets hard to close, and remember neck-sized brass may not chamber in a different rifle.
Will these dies fit my reloading press?
Yes. These dies use the standard 7/8-14 thread, so they'll thread into virtually any single-stage, turret, or progressive press on the market. Just lube your cases before sizing since the .300 RUM is a large bottleneck case.




Reviews
There are no reviews yet.