Description
Straight-wall revolver cartridges like the .45 Colt and .454 Casull need a little extra attention at the bench, and that's exactly why this set ships with three dies instead of two. You can't full-length size a straight-wall case and expand the mouth for the bullet in a single step, so Redding splits the work across dedicated tools. The result is cleaner case prep and ammo that chambers and shoots the way it should.
This is the Series-A set, which is Redding's standard steel line. It's built to the same quality bar as everything else they make, and it lands at a friendlier price because these popular calibers run in higher production volume. Since the sizing die is steel rather than carbide, plan on using a touch of case lube to keep things sliding smooth. That's the one trade-off for the value, and it's a non-issue once it's part of your routine.
What You Get in the Redding 80191 Die Set
The set includes a full-length resizing die with a decapping rod assembly that knocks out the spent primer while it works the case body, an expander die with a neck expanding plug to open the mouth for the bullet, and a seating die with a bullet guide, built-in crimp ring, and the proper seating plug. Redding also tucks in a spare decapping pin and a hex wrench, and the plastic die box doubles as a handy loading block and storage case. There's even a spot inside for your shellholder.
Built the Way Redding Builds Everything
These dies are machined on super-precision lathes from quality alloy steel, then heat treated in controlled furnaces so they hold their tolerances for the long haul. Every die gets hand polished inside and out before it's inspected, ultrasonically cleaned, and packaged. They use the industry-standard 7/8-14 thread, so they drop right into any standard single stage or turret press. Whether you're loading cowboy-action .45 Colt or stepping up to hard-hitting .454 Casull hunting loads, this set covers both from one box. Keep in mind the shellholder is sold separately.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 80191
- UPC: 611760801914
- Series: Series-A Standard Steel
- Caliber: .45 Colt / .454 Casull
- Case Type: Straight-Wall
- Number of Dies: 3
- Die Material: Alloy Steel
- Thread Size: 7/8-14
- Press Compatibility: Single Stage or Turret
- Country of Origin: United States
- Shipping Weight: 1.28 lbs
What’s Included
- Full-length resizing die with decapping rod assembly
- Expander die with neck expanding plug
- Seating die with bullet guide, built-in crimp ring, and seating plug
- Spare decapping pin
- Hex wrench
- Plastic die box that doubles as a loading block and storage case
Frequently Asked Questions
Is a shellholder included with the Redding 80191 die set?
No, the shellholder is sold separately. You'll want the correct Redding shellholder for the .45 Colt / .454 Casull case head, which is the #23. The die box does have a dedicated spot to store it once you add one to your bench.
Are these carbide dies, and do I need case lube?
This is the Series-A standard steel set, not the carbide version. Because the sizing die is steel, you'll need a little case lube to keep resizing smooth and avoid stuck cases. If you'd rather skip the lube step entirely, Redding's titanium carbide NxGEN set is the version to look at instead.
Will this set load both .45 Colt and .454 Casull?
Yes, one set handles both cartridges since they share the same case diameter and the .454 Casull is essentially a lengthened .45 Colt. You just set your dies for the case length you're loading. That makes it a versatile pick if you shoot both from the same revolver or across different guns.
Does this set fit a standard reloading press?
It does. The dies use the industry-standard 7/8-14 thread, so they'll thread right into any standard single stage or turret press. No adapters or special mounting needed.




Reviews
There are no reviews yet.